User's Manual

10
¾ Auto power on/off：Phone can power on/off according to your preset time.
¾
Restore factory settings: You can recover the phone into the initial settings with this function. The default password is: 0000.
9.3. Display
¾
Wallpaper settings: Set an image as wallpaper.
¾
Idle display settings: On, it will be displayed in the standby interface.
¾
Contrast: Adjust the displaying contrast.
¾
Backlight: Set the backlight time.
¾
Keypad backlight time: Set the duration for keypad backlight.
¾
Auto keypad lock: Set to lock the keypad.
9.4. Security
The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone when
leaving the factory is 0000.
The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator.
y PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
y Modify PIN2: Input the correct PIN 2. Just can be change.( The SIM2 security setup is same to the SIM1 security setup.)
y Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each power-on.
y Modify the cell phone password: You can change the phone password.
y Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.
y Lock screen by end-key: Activate, in the idle mode, you can use the power-key to lock the screen.
y Guard lock: You can track your phone when the phone lost; The default password is “123456”
y Fixed dialing: Add the numbers for fixed dialing.
y Black list: You can check the blacklist in here, and also can set the feature whether need to act on calling or messaging.
9.5. Connections
¾
Network account: choice the network settings for data account before you want to use internet.
¾
GPRS Service: enable/disable the GPRS network.
¾
Data connection settings: You can control the internet access as “always connect” or “Connect when needed”.
¾
Network selection: choice the modes of searching the phone network, including Auto and Manual modes.