Owner's Manual

Connecting the Wireless Receiver to your Powered Speakers

1. For AV processor applications, connect the 3.5 mm to single RCA adapter cable to the

LFE input and the input on the wireless receiver.

2. For 2-channel stereo pre-amp applications connect the 3.5 mm to dual RCA adapter

cable to both the L and R powered speaker inputs and to the input on the wireless

receiver.

3. Connect the USB A to Micro B cable to the wireless receiver and the 5 VDC power

supply.

4. Connect the 5 VDC power supply to a 120V AC outlet.

Pairing the Transmitter and Receiver

1. The transmitter and receiver are synched at the time of manufacture and will pair

automatically when connected and powered on.

2. Successful pairing will be indicated by a steady blue light on the transmitter and

receiver.

3. A ashing light indicates the units are not paired. To re-pair the units, perform the

following actions:

4. Press and hold the small button on one unit (it doesn’t matter which one you select)

until the blue light starts blinking.

5. Immediately walk over to the other unit and press/hold the small button until the blue

light starts blinking.

6. Both will blink a few times then turn solid blue when they are successfully paired.

POWER

AMPLIFIER

Receiver

LINE

LEVEL

INP

Audi:~ut

Power C::::)