Owner's Manual
General Placement and Set-up Tips
» Place the subwoofer, powered speakers or amplier at its intended location.
» Try to maintain line-of-sight (no walls or solid barriers) between the transmitter and
receiver for best results.
» Receiver should be within 65 feet of transmitter for best results.
» Avoid placing the transmitter next to devices that could create signal interference,
such as mobile phones, baby monitors, 2.4 GHz wireless phones and 2.4 GHz Wi-Fi
routers.
Connecting the Wireless Transmitter to an AV processor
1. Connect the 3.5 mm to single RCA adapter cable to the subwoofer pre-out or LFE
channel of the AV processor and to the input on the wireless transmitter.
2. Connect the USB A to Micro B cable to the wireless transmitter and the 5 VDC power
supply.
3. Connect the 5 VDC power supply to a 120V AC outlet.
Connecting the Wireless Transmitter to a 2-channel stereo
pre-amp
1. Connect the 3.5 mm to dual RCA adapter cable to the L/R line level pre-outs of the
2-channel stereo pre-amp and to the input on the wireless transmitter.
2. Connect the USB A to Micro B cable to the wireless transmitter and the 5 VDC power
supply.
3. Connect the 5 VDC power supply to a 120V AC outlet.
RECEIVER/PREAMP
LI
NE LEVEL O
UTPUT
S
REAR
Transmitter
SUBWOOFE
R
'i '
~ L
~
Q
Audi
:~
n
Power
C')
RECEIVER/PREAMP
LINE
LE
V
EL
OU
TPUT
S
REAR
SUBWOOFER
(SUBl)
CENTER
o ,
0 0
O R