SOUND ..........
SVS SoundPath Wireless Audio Adapter Owner’s Manual SVS SoundPath Wireless Audio Adapter Thank you for choosing SVS! The SoundPath Wireless Audio Adapter reduces subwoofer cable clutter without sacrificing performance and unlocks wireless connectivity for powered speakers, amplifiers and more. Transmit a pristine, full-range audio signal up to 65-feet at CD-quality and start enjoying the benefits of wireless audio now. Installation requires only a few simple steps.
General Placement and Set-up Tips »» Place the subwoofer, powered speakers or amplifier at its intended location. »» »» »» Try to maintain line-of-sight (no walls or solid barriers) between the transmitter and receiver for best results. Receiver should be within 65 feet of transmitter for best results. Avoid placing the transmitter next to devices that could create signal interference, such as mobile phones, baby monitors, 2.4 GHz wireless phones and 2.4 GHz Wi-Fi routers.
Connecting the Wireless Receiver to your Subwoofer □-@@- • ~ /J51« &111.. 0 -- © - El) ~· Receiver Audio Out Power □ 1. For AV processor applications, connect the 3.5 mm to single RCA adapter cable to the LFE input and the input on the wireless receiver. @ @ l:.vJe~ S T A - 1 500 D LINELlVB. OUTPUT LINELIVB. INPUT 2. For 2-channel stereo pre-amp applications connect the 3.5 mm to dual RCA adapter cable to both the L and R subwoofer inputs and to the input on the wireless receiver. 3.
Connecting the Wireless Receiver to your Powered Speakers POWER AMPLIFIER LINE LEVEL INPUTS Receiver 0 Audi:~ut Power C::::) 1. For AV processor applications, connect the 3.5 mm to single RCA adapter cable to the LFE input and the input on the wireless receiver. 2. For 2-channel stereo pre-amp applications connect the 3.5 mm to dual RCA adapter cable to both the L and R powered speaker inputs and to the input on the wireless receiver. 3.
FAQs and Troubleshooting Does my AV processor correct for the latency (time delay) of the wireless unit? Yes, this will be reflected in a longer than normal subwoofer distance, as shown under the set-up section of the AV processor. An additional 25-28 feet (beyond the actual subwoofer distance) is normal.
Safety Instructions »» »» »» »» »» »» »» »» Read these instructions. »» Do not defeat the safety purpose of any polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two prongs and a third grounding point. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. »» »» »» »» »» »» »» Keep these instructions.
(877) 626-5623 | 260 Victoria Rd. Youngstown, OH, USA | svsound.
