TRI-BAND WIRELESS AUDIO ADAPTER Owner’s Manual
Thank you for choosing SVS! Congratulations on bringing home the SVS SoundPath Tri-Band Wireless Audio Adapter, the best solution available for eliminating subwoofer cable clutter without sacrificing performance. Because it passes a full-range Left/Right stereo signal, you can also wirelessly connect stereo speakers, powered surround sound speakers, amplifiers, and any stereo audio component. The SoundPath Tri-Band Wireless Audio Adapter operates in the 2.4 GHz, 5.2 GHz and 5.
General Placement and Set-up Tips » Place the subwoofer, powered speaker or amplifier at its intended location. » Try to maintain line-of-sight (no walls or solid barriers) between the transmitter and receiver for best results. » Receiver should be within 130 feet of transmitter for best results. » Avoid placing the transmitter next to devices that could create signal interference, such as mobile phones, baby monitors, RF wireless phones and Wi-Fi routers.
SVS SOUNDPATH WIRELESS AUDIO ADAPTER 5V 150mA LINE LEVEL R INPUT OUTPUT L + 30Hz 0° 40Hz _ LOW PASS 60Hz 90Hz 140Hz 90° VOL LFE LOW PASS 180° PHASE PHASE LFE Power Audio Out Pair INPUT OUTPUT Connecting the Wireless Receiver to your Subwoofer L R (Receiver) LFE TRIGGER INPUT R L 3V-12V | AC/DC STA-550D Power Pair Audio Out R OFF ON L 1. Connect the mono RCA cable to the LFE input on the subwoofer and to the R/LFE output on the wireless receiver. 2.
Connecting the Wireless Receiver to Power Amplifiers or Powered Speakers (Receiver) POWER AMPLIFIER LINE LEVEL INPUTS Power Pair L Audio Out L R R TO SPEAKERS SPEAKER LEVEL OUTPUTS 1. 2. 3. For 2-channel applications connect the stereo RCA cable to the L and R inputs on the stereo amplifier or powered speaker inputs and to the L and R outputs on the wireless receiver - CABLE NOT INCLUDED Connect the USB A to Micro B cable to the wireless receiver and the 5 VDC power supply.
FAQs and Troubleshooting Does my AV processor correct for the latency (time delay) of the wireless unit? Yes, this will be reflected in a longer than normal subwoofer distance, as shown under the set-up section of the AV processor. An additional 14 to 20 feet (beyond the actual subwoofer distance) is normal.
Safety Instructions » » » » » » » » » » » » » » » » » Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
(877) 626-5623 | Youngstown, OH, USA | svsound.
