OWNER’S MANUAL PB-2000 SB-2000 POWERED SUBWOOFERS Subwoofer Isolation System
Thank you, and congratulations on purchasing your new SVS SoundPath Subwoofer Isolation System! The SVS SoundPath Subwoofer Isolation System decouples and isolates the subwoofer from the flooring, resulting in tighter and cleaner sounding bass, less buzz/rattle in the room, and fewer complaints from adjacent neighbors in apartments and townhouses. It’s the next best thing to sound-proofing! The SoundPath Subwoofer Isolation System works with any brand of subwoofer which accepts screw-in feet.
TABLE OF CONTENTS PACKAGE CONTENTS INSTALLATION CABINET / BOX STYLE SUBWOOFERS SVS CYLINDER SUBWOOFERS – BASE PLATE RETAINED SVS CYLINDER SUBWOOFERS – BASE PLATE REMOVED SPECIFICATIONS SHARE YOUR THOUGHTS 2 3 4 4 5 6 7 7
PACKAGE CONTENTS Package Contents: 4 Foot System: • Four (4) SoundPath Isolation Elastomer Feet with Steel Outer Shell • Four (4) ¼-20 x 16 mm screws • Four (4) M6 x 16 mm screws • Four (4) M8 x 16 mm screws • Four (4) ¼-20 x 51 mm screws (SVS PC models – baseplate removed) • Four (4) M6 x 51 mm screws (SVS PC models – baseplate removed) 6 Foot System: • Six (6) SoundPath Isolation Elastomer Feet with Steel Outer Shell • Six (6) ¼-20 x 16 mm screws • Six (6) M6 x 16 mm screws • Six (6) M8 x 16 mm screws • S
INSTALLATION CABINET / BOX STYLE SUBWOOFERS Cabinet / Box Style Subwoofers: 1. Place padding such as a soft blanket on the flooring to protect the finish of the subwoofer. 2. Using a helper (if needed), carefully place the subwoofer cabinet on its side or top, resting on the blanket. Take care to avoid damaging the amplifier. Important Notice: When moving the subwoofer, do not allow the weight of the cabinet to place an excessive lateral (sideways) load on the feet.
INSTALLATION SVS CYLINDER SUBWOOFERS SVS Cylinder Subwoofers: There are two options for installing the Isolation System on SVS cylinder subwoofers - base plate retained or base plate removed. Retaining the base plate is recommended in applications which have very high pile carpeting, in order to avoid woofer interference at high playback levels. Aside from that exception, there is no performance difference between the two options, so choose whichever option you personally prefer.
INSTALLATION SVS CYLINDER SUBWOOFERS SVS Cylinder Subwoofers – Base Plate Removed: 1. Using a helper as needed, lay the cylinder subwoofer sideways on a stable surface. Take care to avoid damaging the amplifier. 2. Peel off the original equipment (OE) rubber disc feet. 3. Remove the OE machine screws. Support the base plate as needed to prevent it from inadvertently dislodging while removing the screws.
SPECIFICATIONS Materials Of Construction: • Durable Anodized Steel Outer Shell • Elastomer Foot with Optimized Durometer • Steel Machine Screws SoundPath Isolation Feet Dimensions: • Overall Height: 40 mm • Shell Diameter: 58 mm • Foot Diameter: 53 mm • Screw Engagement Depth: 9 mm (applies to 16 mm length screws) SHARE YOUR THOUGHTS At SVS, we strive to deliver products that surpass every expectation and provide unbeatable value.
NOTES ................................................................................................................................................ ................................................................................................................................................ ................................................................................................................................................ ......................................................................
SVS 6420 Belmont Ave. Girard, Ohio 44420 United States (877) 626-5623 www.svsound.
