OWNER’S MANUAL PB-2000 SB-2000 POWERED SUBWOOFERS Subwoofer Isolation System
Thank you, and congratulations on purchasing your new SVS SoundPath Subwoofer Isolation System! The SVS SoundPath Subwoofer Isolation System decouples and isolates the subwoofer from the flooring, resulting in tighter and cleaner sounding bass, less buzz/rattle in the room, and fewer complaints from adjacent neighbors in apartments and townhouses. It’s the next best thing to sound-proofing! The SoundPath Subwoofer Isolation System works with any brand of subwoofer which accepts screw-in feet.
TABLE OF CONTENTS PACKAGE CONTENTS INSTALLATION CABINET / BOX STYLE SUBWOOFERS SVS CYLINDER SUBWOOFERS – BASE PLATE RETAINED SPECIFICATIONS SHARE YOUR THOUGHTS 2 3 4 4 5 6 6
PACKAGE CONTENTS Package Contents: 4 Foot System: • Four (4) SoundPath Isolation Elastomer Feet with Steel Outer Shell • Four (4) ¼-20 x 16 mm screws • Four (4) M6 x 16 mm screws • Four (4) M8 x 16 mm screws 6 Foot System: • Six (6) SoundPath Isolation Elastomer Feet with Steel Outer Shell • Six (6) ¼-20 x 16 mm screws • Six (6) M6 x 16 mm screws • Six (6) M8 x 16 mm screws mm mm 16 6x mm 16 M 16 x 20 ¼- 8x M SoundPath Isolation Elastomer Feet 3
INSTALLATION CABINET / BOX STYLE SUBWOOFERS Cabinet / Box Style Subwoofers: 1. Place padding such as a soft blanket on the flooring to protect the finish of the subwoofer. 2. Using a helper (if needed), carefully place the subwoofer cabinet on its side or top, resting on the blanket. Take care to avoid damaging the amplifier. Important Notice: When moving the subwoofer, do not allow the weight of the cabinet to place an excessive lateral (sideways) load on the feet.
INSTALLATION SVS CYLINDER SUBWOOFERS SVS Cylinder Subwoofers: 1. Using a helper as needed, lay the cylinder subwoofer sideways on a stable surface. Take care to avoid damaging the amplifier. 2. Peel off the original equipment (OE) rubber disc feet. 3. Only remove one (1) OE machine screw at a time. This will prevent the base plate from dislodging.
SPECIFICATIONS Materials Of Construction: • Durable Anodized Steel Outer Shell • Elastomer Foot with Optimized Durometer • Steel Machine Screws SoundPath Isolation Feet Dimensions: • Overall Height: 40 mm • Shell Diameter: 58 mm • Foot Diameter: 53 mm • Screw Engagement Depth: 9 mm (applies to 16 mm length screws) SHARE YOUR THOUGHTS Our SVS Sound Experts are standing by from Monday to Friday form 9AM-9PM ET, Saturday from 12PM-6PM, and Sunday from 12PM-4PM to assist you with subwoofer set-up and optimizat
NOTES ................................................................................................................................................ ................................................................................................................................................ ................................................................................................................................................ ......................................................................
NOTES ................................................................................................................................................ ................................................................................................................................................ ................................................................................................................................................ ......................................................................
SVS 260 Victoria Rd. Youngstown, Ohio 44515 United States (877) 626-5623 www.svsound.
