Quick Start Guide

Sub Out
Add a subwoofer using standard audio interconnect cable (not included). or the
optional SVS SoundPath Wireless Kit.
L/R AUX In
Connect any stereo source that has a left and right stereo analog output.
Out to Left Speaker
Connects your active Prime Wireless speaker to the passive speaker using
supplied speaker interconnect cable.
Optical In
Connect sources with optical digital outputs such as a TV or game console.
3.5mm AUX In
Connect to headphone outputs of smartphones, tablets or other audio devices.
Wi-Fi Setup
Puts speaker into Wi-Fi set-up mode and shows status of wireless connection.
Blinking yellow light indicates set-up mode, solid light means it’s set-up and ready
to use.
In/Out Network
Connect standard Ethernet cable for hard-wired Internet connection.
Mono/Stereo
Toggles between Mono mode for a single Prime Wireless powered speaker or
Stereo mode for active and passive Prime Wireless speaker pair.
Service
For rmware updates and for powering or charging USB devices.
Bluetooth Setup
Puts speaker in Bluetooth pairing mode and shows status of Bluetooth
connection. Blinking blue light indicates pairing mode, solid light means it’s
connected and ready to use.
AC Power Cord Input
1 2 3 4 5 6
7 8 9 10
11
1
2
3
4
5
6
7
8
9
10
11
1. The active speaker with front and rear controls will always
be the right speaker and the passive speaker with no
controls is the left speaker.
2. Set switch on rear panel to “Stereo”
8
.
Placing and Connecting Your Speakers
3. Plug supplied interconnect cable into “Out to Left Speaker”
3
on rear panel of
right speaker. Plug other end of cable into corresponding input on left speaker.
4. Plug in power cords
11
and continue to “Setting Up Wi-Fi and the DTS Play-Fi App”
section to set up and name each speaker.
Owner Support
For help with connecting your SVS Prime Wireless Speakers, using the Play-Fi App
or anything else, SVS Sound Experts are available 7 days a week.
[e-mail] Visit svsound.com for online chat(877) 626-5623
The full SVS Prime Wireless Speaker System owners manual can be found here:
www.svsound.com/prime-wireless-manual
1. Press the Bluetooth Setup button
10
once to activate
Bluetooth pairing. This is indicated when the blue LED on
the rear panel goes from slow to a rapid blinking.
2. Select Bluetooth as your source by rotating the left knob
A
until the Bluetooth logo on the front panel display is
highlighted
B
.
Setting Up Bluetooth
3. View Bluetooth settings on your mobile device and select “SVS SPEAKER...”
4. Conrm pairing when the light stops blinking and remains on. You can now
stream music services and audio content from your device any time you select
Bluetooth as your source.
1. Connect your device to the Optical in
4
or L/R
Aux In
2
inputs or the AUX In
5
on your Prime
Wireless Speaker System.
2. Select the input by rotating the left control knob A
the source will be displayed on the front panel
B
.
Connecting Devices via AUX
and Optical Inputs
3. Operate device as normal.
4. Volume can be controlled from the Play-Fi app.
Connections and Controls
Speaker
Interconnect Cable
Power Cord