Quick Start Guide

Once your speakers are set up, you can access music from your devices and your
favorite streaming services. You can also enjoy full resolution Critical Listening Mode
Critical Listening Mode, create a multi-room audio system, and more.
1 42 53 6
Congure Play-Fi App
Open the Play-Fi app and follow the prompts to nish setting up
your Prime Wireless Speaker on your home Wi-Fi network.
Note: The speakers may require an update before letting you stream music. The Play-Fi app will show a notication and
complete the update automatically. This is normal and can take 3-5 minutes.
If your SVS Prime Wireless speaker is not being discovered by the Wi-Fi network, try moving it closer to your router or to
a stronger signal area to establish a connection. Also, make sure the speaker and app are both congured to the same
Wi-Fi network in your home.
Select “Set Up Play-Fi
Device”
Choose a name for your
Prime Wireless Speaker.
Choose “Set-Up” to
congure your Speaker
and Wi-Fi network.
Select new device name
from Play-Fi menu.
Enter your Wi-Fi network
password and select
“Next”
Select your favorite
streaming method/
service
 iOS users must go to the “Settings” -> “Wi-Fi” and connect to
“PlayFiDevice...” like you would a normal Wi-Fi network.
 Android users skip to step 4.
Connect Speaker to Wi-Fi Network
Current services available as presets. More options coming soon, check svsound.com/products/prime-wireless for updates.
Up to six presets are available for instant access to your favorite
streaming music channels, playlists and other content.
1. From the Play-Fi app, start the streaming service you want to
set as a preset.
2. Press the left control knob
A
to select which preset
B
you want to set (1-6). Each
press will move to the next preset.
3. When desired preset number is selected, press and hold the preset knob for three
seconds. The preset number will ash several times then stay on to conrm, and
music will resume playing.
4. Follow instructions above for the remaining ve presets.
5. You can now access your favorite content by pressing the left knob to toggle through
your presets at any time.
To reset a preset, repeat the steps 1 - 5.
NOTE: It takes a few seconds for the preset to connect to music services from your Wi-Fi network. This is normal.
Create Custom Presets
Once powered on, the speaker will automatically go into Wi-Fi
setup mode, indicated by a rapidly blinking yellow light on the
rear panel of the speaker. When the blinking light slows down,
the speaker is ready to connect. Wi-Fi connection is conrmed
when yellow light remains on permanently.
Start Speaker Wi-Fi Setup Mode
Search “Play-Fi” and download the free DTS
Play-Fi app to unlock the full functionality of
your SVS Prime Wireless Speakers.
Download Play-Fi App
Speaker Interconnect CablePower Cord
Included AccessoriesWelcome!
Congratulations on bringing home the SVS Prime Wireless Speaker System, a
stunning achievement in sound quality and speaker versatility. We know you are
eager to start playing so this Quick Start Guide will walk you through the various
controls and connections and get you on the fast path to enjoying high-resolution
wireless streaming of your favorite playlists and music services.
CBA
Setting Up Wi-Fi
and the DTS Play-Fi App
Source & Preset Control
Rotate the knob to change the input. Press the knob to select a preset (after they
are programmed).
Front Panel Display
LED backlighting indicates the selected audio source (Wi-Fi, Bluetooth, Optical or
Auxiliary) and preset (1-6).
Play, Pause & Volume Control
Rotate the knob to adjust volume. Press the knob to pause/un-pause.
A
B
C