Owner's Manual

4. 4. Protective grille covers come attached via pin/cup retention system. Prime Wireless speakers can also be

used without grille covers depending on your aesthetic preference, just avoid making direct contact with

exposed drivers.

Front Panel ControlsFront Panel Controls

Source & Preset Control

Rotate the left knob to change the input. Press the knob to select a preset (after they are programmed).

Front Panel Display

LED backlighting indicates the selected audio source (Wi-Fi, Bluetooth, Optical or Auxiliary) and preset (1-6). Wi-Fi

indicator will turn green when streaming Spotify.

Play, Pause & Volume

Rotate the right knob to adjust volume. Press the knob to pause/un-pause.

Rear Panel Connections & ControlsRear Panel Connections & Controls

1. Sub Out

Add a subwoofer using standard audio interconnect cable (not included) or the optional SVS SoundPath

Wireless Kit.

2. L/R AUX RCA In

Connect any stereo source that has a left and right stereo analog output.

3. 3.5mm AUX In

Connect to headphone outputs of smartphones, tablets or other audio devices. Note that 3.5mm input will

override L/R AUX RCA inputs if both are used simultaneously.

4. Out to Left Speaker

Connects your active Prime Wireless speaker to the passive speaker using supplied speaker interconnect cable.

5. Optical In

Connect sources with optical digital outputs such as a TV or game console.

6. WiFi Setup

Enables WiFi set-up mode and shows status of wireless connection. Blinking yellow light indicates set-up mode,

solid light means it’s set-up and ready to use.

7. In/Out Network

Connect standard Ethernet cable for hard-wired network connection.

8. Mono/Stereo

Toggles between Mono mode for a single Prime Wireless powered speaker or Stereo mode for active and

passive Prime Wireless Speaker System.

9. Service USB

For ﬁrmware updates and charging phones and tablets or powering USB devices like a SoundPath Wireless

Audio Adapter to make your subwoofer fully wireless.