Owners Manual

Having Trouble Connecting?
The Prime Wireless SoundBase may require an update before letting you stream music. The Play-Fi app will show
a notification and complete the update automatically. This is completely normal and can take 3-5 minutes.
If it’s not being discovered by the WiFi network, try moving it closer to your router or to a stronger signal area to
establish a connection. Also, make sure the Prime Wireless SoundBase and app are both configured to the same
WiFi network in your home.
Not going into setup mode?
Standard Set-Up Mode: To put the device into Standard Set-Up Mode, hold the WiFi button down for 8 seconds.
You will hear a tone at 4 seconds, but do not release the button until after you hear the same tone again after the
full 8 seconds. The product will now be in Standard Set-Up Mode, and the WiFi light will slowly pulse on and off.
WPS Mode: To put the device into WPS Mode, hold the WiFi button down for 4 seconds. At 4 seconds you will hear
a tone and the WiFi light will begin to blink a pattern of two times on and then a pause and then repeat. It is now
Image 9d. Image 9e. Image 9f.