Wall Mount Template

PRIME ELEVATION

WALL MOUNTING TEMPLATE

OPTION #3 UP-FIRING

THIS SIDE UP 

OPTION #4 LEFT/SIDE-FIRING

THIS SIDE UP 

punch out speaker template

INSTRUCTIONS:

Punch out the speaker template and choose the desired mounting orientation from the four available options.

Using this template as a guide, ﬁnd the best mounting location for your Prime Elevation speaker.

Tape this template to the wall and pre-drill the four mounting holes of the Prime Elevation SVS Multi-Angle Wall Bracket (patent pending) .

Note: Leave at least 0.5” of clearance between the template and any adjacent surfaces for ease of speaker attachment.

Consult the owner’s manual for speciﬁc instructions on mounting your Prime Elevation speaker and Multi-Angle Wall Bracket (patent pending) .

PAGE 1
punch out speaker template THIS SIDE UP OPTION #3 UP-FIRING THIS SIDE UP PRIME ELEVATION WALL MOUNTING TEMPLATE OPTION #4 LEFT/SIDE-FIRING INSTRUCTIONS: Note: Leave at least 0.5” of clearance between the template and any adjacent surfaces for ease of speaker attachment. 1 Punch out the speaker template and choose the desired mounting orientation from the four available options. 2 Using this template as a guide, ﬁnd the best mounting location for your Prime Elevation speaker.
PAGE 2
punch out speaker template THIS SIDE UP OPTION #1 DOWN-FIRING THIS SIDE UP Consult the owner’s manual for speciﬁc instructions on mounting your Prime Elevation speaker and Multi-Angle Wall Bracket (patent pending) . Note: Leave at least 0.5” of clearance between the template and any adjacent surfaces for ease of speaker attachment. 1 Punch out the speaker template and choose the desired mounting orientation from the four available options.