User Manual

120V~60HZ
Using the Mixing Bowl
1. In order to lift the arm, clockwise rotation the rise knob (2) . The arm will now move upwards.（FIG1）
2. Place the pot cover into its body.
(FIG2)
3. Place the mixing bowl into its holding device(Step①) and turn the bowl clockwise until it locks into place(Step
②).
(FIG3)
4. Mount the required utensil（Dough hook or Beater or Whisk）by inserting the top into the output shaft,
and turn anti-clockwise un
til it locks into place.
(FIG4&FIG5)
5. Now fill in your ingredients.
Do not overfill the machine - the maximum quantity of ingredients is 1.5kg.
6. Lower the arm using the rise knob (2).
(FIG6)
7. Insert the mains plug into a properly installed safety power socket.
8. Switch the machine using the speed knob to a speed between 1 and 6 (corresponding to the mixture).
9. For pulse operation (kneading at short intervals), turn the switch to t
he “PULSE” position. The switch has to be
held in this position according to the desired interval length. When the switch is released it returns automatically
to the “0” position.
10. After kneading/stirring turn the speed knob (3) back to the “0” position as soon as the mixture has formed a ball.
Then remove the mains plug.
11. Push the rise knob (2) downwards and the arm will be raised.
12. The mixture can now be released with the help of a spatula
and removed from the mixing bowl.
13. The mixing bowl can now be removed.
14. Clean the parts as described under “Cleaning” .
FIG1
FIG2
FIG3
FIG4
FIG5
FIG6
Step 1
Step 2