User Manual

ENG

Keyboard + Mouse

Wireless Combo Set

6. CONNECTION

• Connect the 2.4 GHz USB nano receiver to a free USB port of your PC.

• To activate the set, press any button of the mouse or turn the scroll wheel. If the connection

is correct, the set will turn on automatically.

• After nishing your work, you can pull out the receiver from the PC USB port and insert it

into the mouse.

• If the mouse or keyboard don’t work, connect them to the nano receiver again. To recon-

nect the mouse to the nano receiver, press its right button and the scroll wheel at the same

time and, while holding them, pull out and insert the 2.4 GHz nano receiver back into the USB

port. To reconnect the keyboard to the nano receiver, press its «ESC» and «K» buttons

at the same time and, while holding them, pull out and insert the 2.4 GHz nano receiver back

into the USB port.

Notes. Do not place the receiver into a conned metal space (table drawer, box, safe), as

ametal screen does not transmit radio signals. If batteries run down, there are «lapses»

inoperation of the mouse or keyboard. In such a case replace the batteries with new ones.

If there is a long pause in operation of the mouse or keyboard, they enter the Sleep mode.

To enter the working mode just press any button.

7. TROUBLESHOOTING

Problem Solution

The keyboard/mouse

is not working.

1. Check whether the batteries have been installed correctly. If nec

essary, replace the batteries with new ones matching the polarity.

2. Pull out the USB receiver and insert it back, make sure that it is

not damaged.

3. We recommend that you address your nearest service center.

If none of the above methods can solve the problem, please seek professional advice at your

nearest service center. Never attempt to repair the product yourself.