Tus neeg siv phau ntawv

ENG
4
Wireless Stereo Headphones
withMicrophone
• It is necessary to select the search mode of de vices with Bluetooth on a signal source (tele-
phone, notebook, smartphone, etc.). “SVEN AP-B500MV” massage will be displayed onthescreen,
which is to be connected to*.
• If connection is successful, there will be a short beep signal in the headphones; the search
mode indication on the headphones is over. If no devices is connected, headphones will turned
o automatically in 2 minutes. If the device interfacing has, been failed, it is necessary to switch
the system in the search mode once more (turn o and on)**.
• The indicator d on the headphones blinks blue short during the data exchange (listening
music) with a device connected via Bluetooth.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose only the item name “SVEN AP-B500MV” and the “con
-
nect” command on the source.
The use in the wired mode
• The device can be used as stereo headphones in the wired mode. In order to connect them
to a sound source with the included cable via jack f.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit Value
Sensitivity, dB headphones: 105 ± 3
microphone: -58 ± 3
Frequency range, Hz headphones: 20–20 000
microphone: 30–16 000
Impedance, Ohm 32
Membrane, mm ø 40
Connection type Bluetooth 5.2/mini-jack stereo Ø 3.5 mm (3 pin)
Bluetooth supported proles HSP, HFP, A2DP, AVRCP
Radius of operation, m up to 10
Operation time, h up to 12
Cable length, m 1.2
Weight, g 155
Notes. Technical specications given in this table are supplemental information and cannot
give occasion to claims. Technical specications and package contents are subject to chan
-
ge without notice due to the improvement of SVEN production.
Technical support is on www.sven..