Installation Manual

1 2
Observation Discovery & Exploration
SV601 SETTING UP & OPERATION
Step 1:
Remove the microscope,
and insert WF10X eyepiece
Step 2: Insert the battery or connect to
electricity, turn on the lights. Make
the light in view
Step 3: .Put the slides on the working
stage, fixed by moving scale, adjust
object position to the middle of light
Step 4: Adjust the objectives to the low
position, then move it up slowly by focuser.
Adjust fine focuser can get better view
Step 5: Move the objectives adaptor, change
the magnifi cations from Min. to Max.
Step 6:The filters under working stage can
make the vision in different colors.