Instruction manual

VISS3000
6
SVAT ELECTRONICS
Now You Can See
INST
INST
ALLA
ALLA
TION INSTRUCTIONS
TION INSTRUCTIONS
Outdoor Station (camera)
1. Fasten the rain sunshade cover
on the wall
2. Connect the wires according to
the wiring diagram (1) or (2) to
the terminals on the back of the
outdoor station.
3. Fasten outdoor station to the
rain cover with the provided screw.
4. Place the nameplate over the
mounting/screw hole.
Indoor Monitor
1. Embed the 86*86mm box into
the wall.
2. Secure the bracket on the wall
with the supplied screws,
referring to the dimension in the
rear view.
3. Connect the transfer wire with
the terminal of the indoor
monitor through the 86*86mm box.
4. Match the two grooves of the
indoor monitor`s upper center
with the two sides of the
bracket, then press the indoor
monitor into the bracket and
move it downward to finish
the installation.
Bracket
Wall
Embedded Box
Bracket
Embedded
Box
Wall
Bracket
Embedded
Box
Wall
Rear View
Side View
Bird View