Instruction manual

VISS3000

SVAT ELECTRONICS

Now You Can See

WIRING

1.For single monitor wiring please see diagram #1, and #2 for connecting multiple

monitoring stations.

2.For clearer picture, please use 75Ohm coaxial cable for connecting terminal

R1(VIDEO) and R2(GND) between outdoor station and indoor monitor.

3.This system will be operational without the electric door strike installed.

4.If only one indoor monitor used with outdoor station, set on the image impedance

matching switch to 75 , if more than one indoor monitor is used, only set on the

last indoor monitor to 75 , turn all others OFF.

(Diagram 1)

(Diagram 2)

AV Terminal

Electronic Lock

Adapter

Electronic Lock

Adapter