Instruction manual

VISS6002
6
SVAT ELECTRONICS
Now You Can See
WIRING DIAGRAM FOR MULTIPLE MONITORS
*Be sure to disconnect the power before connecting the wires*
Important Notes
• Wires are color coded and are interchangeable.
Make sure the wire that is connected to Pin 1 on the monitor is connected to Pin A
on the camera.
Also make sure the wire connected to Pin 3 on the monitor is connected to Pin B on
the camera.
• The additional monitors can be wired from the Master Monitor itself or they can be
wired back to the camera as well.
The wires for all monitors must be connected to the corresponding Pins as
mentioned above. Wires are color coded for easy identification.
Additional
Monitor
Master
Monitor
Additional
Monitor
Camera
Doorstrike
(Not Included)