Instruction manual

VISS6002

SVAT ELECTRONICS

Now

You

Can

See

CAMERA INSTALLATION & OPERATION

USING THE CAMERA

• Press the CALL button on the camera

• Picture of the visitor is displayed on the indoor monitor

• In order to communicate with the visitor press the TALK/VIEW button.

• By pressing the UNLOCK button, you can also open the doors for your visitor without

getting up (this feature requires an installed door strike, not included).

*NOTE* The camera’s CALL button must be pressed first by the visitor, followed by

the Talk/View button in order to speak with your visitor.

CONNECTING TO A TV

You can connect the monitor to your television/DVR/VCR for viewing and recording

purposes. You will need to purchase a separate composite RCA cable (red, white and

yellow). Follow these instructions:

1. Plug the included RCA adapter into the monitor

2. Plug the RCA cable into the jacks on the end of the RCA adapter.

3. Plug the RCA cable into the inputs of your television/DVR/VCR.

4. Make sure the television is on the INPUT channel.

5. Whenever video is displayed on the system's monitor, it will also be displayed

on your TV.

Standard Height

of Camera

Move it up

Move it down

Horizontal angle

of the camera

LOCATION

Keep the camera away from direct sunlight

or any other bright light sources.

POSITIONING

145cm ~ 160cm