SVAT ELECTRONICS Now You Can See 2 WIRE B/W VIDEO INTERCOM SYSTEM COMPLETE SYSTEM Instruction Manual Model # VISS6002 www.svat.
SVAT ELECTRONICS Now You Can See PRODUCT WARRANTY & REGISTRATION Please visit our website at www.svat.com to apply for your products warranty registration. The warranty registration for is located under the support tab on the SVAT website. We take quality very seriously. This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials.
SVAT ELECTRONICS Now You Can See TABLE OF CONTENTS WHAT IS INCLUDED ............................................................1 WHAT IS COMPATIBLE ........................................................1 IMPORTANT SAFETY PRECAUTIONS................................2 FEATURES............................................................................3 PARTS OF THE SYSTEM ....................................................3 THINGS TO CONSIDER ......................................................
SVAT ELECTRONICS Now You Can See IMPORTANT SAFETY PRECAUTIONS PLEASE READ BEFORE INSTALLING • Keep the camera, monitor and AC/DC adapter cords out of reach of children. • Do not place the camera, monitor and AC/DC adapter cords in a crib or playpen. • Do not use the camera near water or damp and wet environments, such as a bathtub, laundry tub, kitchen sink, or wet basements. • Locate the camera, monitor and AC/DC adapters where there is adequate ventilation. Do not locate the camera in direct sunlight.
SVAT ELECTRONICS Now You Can See FEATURES • Sleek and ultra thin monitor design • Two wire connection allows you to use the existing wire from your doorbell for easy installation • 4" CRT screen • Two way communication • 12-14V doorstrike capabilities (doorstrike not included) • Warning alarm siren • Monitor can be wall mounted or laid flat PARTS OF THE SYSTEM Speaker 4” CRT B/W Screen Warning Button Doorstrike Button Talk/View Button Microphone A/V Out Volume Contrast Audio (white and red) Audio/Vid
SVAT ELECTRONICS Now You Can See THINGS TO CONSIDER BEFORE INSTALLATION • Do not place the intercom system near strong magnetic fields, such as televisions and video recorders. • Turn off the video intercom system power if not in use for long periods of time. • Do not place the video intercom system in direct sunlight. • Do not disassemble this device freely, there are high voltage flows inside the system that can cause bodily harm.
SVAT ELECTRONICS Now You Can See WIRING DIAGRAM *Be sure to disconnect the power before connecting the wires* Camera Monitor Doorstrike (Not Included) Important Notes • Wires are color coded and are interchangeable. Make sure the wire that is connected to Pin 1 on the monitor is connected to Pin A on the camera. Also make sure the wire connected to Pin 3 on the monitor is connected to Pin B on the camera. • Pins C and D on the camera are for use with the doorstirke.
SVAT ELECTRONICS Now You Can See WIRING DIAGRAM FOR MULTIPLE MONITORS *Be sure to disconnect the power before connecting the wires* Camera Master Monitor Doorstrike (Not Included) Additional Monitor Additional Monitor Important Notes • Wires are color coded and are interchangeable. Make sure the wire that is connected to Pin 1 on the monitor is connected to Pin A on the camera. Also make sure the wire connected to Pin 3 on the monitor is connected to Pin B on the camera.
SVAT ELECTRONICS Now You Can See MONITOR INSTALLATION & OPERATION 145cm ~ 160cm AC: 110 ~ 240V The optimum height of the monitor for installation is 145cm ~160cm from the center of the pick-up tube of the monitor to the ground. Take two screws and fix the support of the wall-mount on the wall and then install the monitor. USING THE MONITOR • When the monitor is in standby, pressing the Talk/View button turns the monitor and outside camera ON.
SVAT ELECTRONICS Now You Can See CAMERA INSTALLATION & OPERATION POSITIONING Standard Height of Camera Move it up 43o 145cm ~ 160cm 145cm ~ 160cm 66o Move it down Horizontal angle of the camera 145cm ~ 160cm 23o 53o LOCATION Keep the camera away from direct sunlight or any other bright light sources. USING THE CAMERA • • • • Press the CALL button on the camera Picture of the visitor is displayed on the indoor monitor In order to communicate with the visitor press the TALK/VIEW button.
SVAT ELECTRONICS Now You Can See SPECIFICATIONS INDOOR MONITOR Power Supply ..................................DC16V Power Consumption ........................10W in operation, 1W standby Operation Temperature ....................5oF ~ 122oF Conversation System ......................Bi-directional through receiver Calling Tone ....................................“Ding Dong” chime Conversation Time ..........................Automatic cut off after 1 minute Scanning Frequency ........................
SVAT ELECTRONICS Now You Can See w w w. s v a t . c o m Disclaimer S VAT d o e s n o t e n d o r s e a n y o f S VAT p r o d u c ts f o r a n y i l l e g a l a c t i v i t i e s . S VAT i s n o t r e s p o n s i b l e o r l i a b l e i n a n y w a y s h a p e o r f o r m f o r a n y d a m a g e , v a n d a l i s m , t h e ft o r a n y o t h e r a c t i o n t h a t m a y o c c u r w h i l e a S VAT p r o d u c t i s i n u s e b y t h e p u r c h a s e r. Model # VISS6002 www.svat.
