Specifications

Connecting to tiltrotatorsystem (MACS-RT, XCG2)

1. Connect the quick couplers according to sections Connecting quick coupler, original and Tr-system

and Connect external excavator system.

NOTE

Please note that feed cable is not installed since the feed is obtained through CAN.

2. Connect CAN cable 801062 from Quantum hub to the control unit.

Mount the TRM

The TRM-module should be mounted on the tool in room temperature for best result. The temperature

may not go under - 10 grader C.

The module is delivered with the battery, seal and screws on the side.

1. Remove the cover on the module and install the battery.

2. Install the seal.

NOTE

Make sure the seal[1] is placed correctly in the groove [2].

Quantum