Specifications

Connect feed and external excvatator system (when applicable)

Connect to external system (when applicable)

1. Connect the cable P-0000585 to external system, such as an excavator system. Connect the cable

[6] to output marked CAN2 on the hub.

2. Connect connector P-0000723 [7] to external system.

Connect the feed

1. Connect the feed cable P-0001345 [8] to output marked 8 - 36 VDC / CAN1 on the hub.

2. Connect + feed [9] to suitable power supply (12 - 24 V). Fuse with 5 A fuse

3. Connect GND [10] to ground.

NOTE

The hub shall only be powered up when ignition is turned on (connection 15 )

Quantum