User's Manual

4 / 8
Using Directions:
1. Equipment connection Connect LIU - 0816-8 IEC C13 output plug with one side of the output line,
connect 8 output line respectively with the power input end of the server which needs power supply.
Connect one side of input line plug with the LIU - 0816 - WN IEC320 C20 input socket, and the other side
with the AC power supply socket. After that, LIU - 0816 - WN will start from the first port to the 8th port
with interval of 1 second, and supply power for the server. Display panel will show the current supply
voltage and total output current of 8 circuits, 8 LED indicator light indicates the state of current 8 output
port.
2. Check the IP address The display will show LIU - 0816 - current IP address after pressing the FUNC
button when the display shows the voltage and current. The default IP address is 192.168.0.100
3. Check the temperature and humidity The display will show temperature and humidity of LIU - 0816 -
WN built-in temperature and humidity sensor after pressing the FUNC button in the state of screen shows
the IP address. The left screen shows temperature and the right screen shows humidity.
4. Reset of the equipment Press the LIU - 0816 - WN RST button on the front panel, it will reset .
5. Network access and control With LIU - 0816 - WN power-on, users can achieve the function that PC
host access and control LIU - 0816 - WN in the same LAN by connecting RJ45 socket with network
①. Login control interface Open the IE browser on any PC in LAN host, the address bar:
Http://192.168.0.10, uses can login LIU - 0816 - WN control interface after inputting user name (admin),
password (admin) in the jumped login screen as shown in the picture below.
②. PDU system information Click the "System" on the left side of the information bar, to indicate the PDU
system information as the following picture.