User's Manual

After Use

z Press LCD power key, the LCD is power off.

z Close LCD panel and lock the front panel.

z Release guide lock.

z Push the control panel into the cabinet totally, and then it is power off.

Hot Plug

The LCD Console supports hot plug. It can be connected and disconnected without power off.

Please follow the steps:

 Hot plug PC connecting port:

When hot plugging PC port:

1. The connecting wire must be plugged into the port from which it is pulled out.

2. Plug the mouse before the keyboard.

Power On/Off and Reboot

If user needs to cut off the power of LCD Console, please follow the steps before power on again.

1. Cut off the power supply of all computers.

Note:

1) The power wire of computer with keyboard power on function must be pulled out. Otherwise, the

KVM still receives the power signal from computer.

2) If the control unit uses the external power, please pull out external power.

2. After about 10 seconds, power on the LCD Console.

3. After the KVM switch starts, power on the computers.