LCD Console User Manual 1
User Manual Explain INTRODUCTION ..........................................................................................................................................3 FEATURES.....................................................................................................................................................4 PRODUCT TYPE...........................................................................................................................................5 VIEW OF PRODUCT ...........
INTRODUCTION LCD Console is one witch integrate a multiple ports KVM switch into 1U height. It controls multiple computers with one platform (keyboard, mouse and monitor). A KVM switch can control 4/8/16 PC by direct connection and it can control 256 PC at most by 2 level cascade connection. It is easy and quick to install. Just connect the wire to the correct port without software configuration. So there is no difficulty in installation and incompatibility.
FEATURES Control Platform Control platform with LCD, keyboard, mouse and multiple ports KVM switch. 1U height, suitable for 19’’ standard cabinet installation and metal structure. 15/17/19’’ LCD screen with high brightness, high clear and high resolution. Control platform can be totally pulled out from the cabinet and the LCD screen can be turned on to 120 degrees. Ultra thin keyboard with keypad. Mouse touch board with two function button. Front panel with lock to prevent damage by accident.
PRODUCT TYPE Type OSD Function AS-3100ULG No AS-3104/08/16ULG Yes AS-7100ULG No AS-7104/ 08/16ULG Yes AS-9100ULG No AS-9104/ 08/16ULG Yes Note 15 inches LCD screen, keyboard and mouse. And Body parts can be easily demolished 15 inches LCD screen, keyboard, mouse and 4\8\16 ports PS/2 KVM. And Body parts can be easily demolished 17 inches LCD screen, keyboard and mouse. And Body parts can be easily demolished 17 inches LCD screen, keyboard, mouse and 4\8\16 ports PS/2 KVM.
VIEW OF PRODUCT FRONT VIEW 1. Handle 2. Lock 3. Front panel 4. LCD screen 5. Rear hang ear channel 6. OSD control key 7. Front hang ear 8. Mouse touch board 9. Guide 10.
REAR VIEW AS-3100L/AS-7100L/AS-9100L AS-3104ULG/AS-7104ULG/AS-9104ULG AS-3108ULG/AS-7108ULG/AS-9108ULG AS-3116ULG/AS-7116ULG/AS-9116ULG 1 ① ② ③ ④ 2 3 4 DC 12V 4000Ma power socket USB keyboard & mouse port Cascade port（ Optional） PC connecting port 7
DIMENSION 8
KVM SWITCHES PACKING LIST Type Name Num/Unit 1 15 inches LCD screen, keyboard and mouse control platform integrated KVM switch with multiple ports (4/8/16ports). 17 inches LCD screen, keyboard and mouse control platform integrated KVM switch with multiple ports (4/8/16ports). 19 inches LCD screen, keyboard and mouse control platform integrated KVM switch with multiple ports (4/8/16ports).
LCD CONSOLE CONNECTING WIRE Cable Type USB Connecting Cable PS/2 Connecting Cable Applicable Type KVM Port AS-31/71/91ULG Series Products VGA port (Keyboard, mouse and monitor) VGA Port (Keyboard mouse And monitor) PC or Server Port VGA、Keyboard、Mouse (Standard USB Interface) VGA、Keyboard、Mouse (Standard PS/2 Interface) USB Connecting Cable PS/2 Connecting Cable 10
LCD CONSOLE POWER WIRE Wire Type AC Power Wire Note 3 Plugs of National Standard Voltage Range 100~240V Machine Type All '& 32> (5 $& Power adapter 11
OPERATION CONNECTION OF KVM SIGNAL WIRE 1. PS/2 connecting wire Connect the end with 3 sockets to the LCD Console, and the other to the computer. 2. USB connecting wire Connect the end with HD15 to the USB LCD Console, and the other to the computer.
Before Use z z Make sure all the devices are safely grounded. Make sure the KVM wire and power wire are connected correctly. During Use z z Pull the LCD Console out from cabinet totally, the guide locks automatically and the power turns on. Release front lock. As shown below: z Then open the front panel and the LCD can be turn on to 120 degrees. As shown below: AUTO LOCK UNLOCK z Press LCD power key (red), the LCD is on.
After Use z z z z Press LCD power key, the LCD is power off. Close LCD panel and lock the front panel. Release guide lock. Push the control panel into the cabinet totally, and then it is power off. Hot Plug The LCD Console supports hot plug. It can be connected and disconnected without power off. Please follow the steps: Hot plug PC connecting port: When hot plugging PC port: 1. The connecting wire must be plugged into the port from which it is pulled out. 2. Plug the mouse before the keyboard.
Assembling & Disassembling The device can be assembled and disassembled as following.
STANDARD RACK INSTALLATION 1. Screw the front flange to the rack first. Slide the bars with the rear flange towards the rack until the flanges make contact with the rack, then screw the rear flanges to the rack. 2. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely attach the front of the switch to the front of the rack. 3. Slide the rear attachment sliding brackets along the slide bars until they contact the rear of the switch.
4. Use the screws supplied with this package to attach the bars to the rear of the switch.
OSD OPERATION OSD OVERVIEW The On Screen Display (OSD) is used to handle all computer control and switching procedures. All procedures start from the OSD main menu. To pop up the main menu, tap the [Scroll Lock] twice. Note: You can optionally change the hotkey to the Ctrl key, in which case you would tap [ctrl] twice. If OSD menu is set as “console locked”, you must input password each time the main menu appears. If no password has been set, just press [Enter] to show main menu.
OSD MAIN SCREEN HEADINGS Heading PN QV PC NAME Explanation This column lists the port numbers for all the CPU ports on the installation. The simplest method to access a particular computer is to move the highlight bar to it, then press [Enter]. If a port has been selected for Quick View scanning, an arrowhead symbol displays in this column to indicate so. The computers that are powered on and are on line have an arrowhead symbol in this column to indicate so.
main screen with this function. The choices and their meanings are given in the table below: Choice Meaning ALL Lists all of the ports on the installation. QVIEW Lists only the ports that have been selected as Quick View Ports. POWERED ON Lists only the ports that have their attached computers powered on. POWERED ON + Lists only the ports that have their attached computers powered on and QVIEW have been selected as Quick View Ports.
Move the highlight bar to an option and press [Enter] to select it. CHANNEL DISPLAY POSITION: Position of the tip window. A small blue window appears on the screen. Use arrow key to move it, then press [Enter] to specify the position. SCAN DURATION: Duration for scanning one port。 Options are 3 seconds, 5 seconds, 10 seconds, 15 seconds, 20 seconds, 30 seconds, 40 seconds, 60 seconds. Move the highlight bar to an option and press [Enter] to select it.
SAFE GUIDE Please follow the directions below when installing, using and maintaining it in order to guarantee the device to work well. When installing and operating the device, please make sure proper power supply first, and then do other operations after it is initialized. As signal and power transfer need custom cable, please use matched cable, unmatched cable may cause system work improperly or even damage the device. Keep airy during operating to prevent high temperature.
