User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual
27
 SWITCH HOTKEY
This function can set the shortcut hot key for port switching. The user can directly select the port to be
switched, skip the OSD display interface selection, and facilitate the user's quick operation. This function
provides 4 hot key combinations: [SCROLL] + [SCROLL] + [NUM], [CTRL] + [CTRL] + [NUM], [ALT]
+ [ALT] + [NUM], [SHIFT] + [SHIFT] + [NUM]. You can use the [↑] [↓] arrow keys on the keyboard as
needed to move the cursor for selection, then press [Enter] key to save and make it effective. The initial
default is to use [SCROLL] + [SCROLL] + [NUM] as the hot key for port switching.
Note: The hot key combination you set should not be the same as OSD ACTIVATING HOTKEY, otherwise
it will affect the relevant operations and function switching. If there is a conflict with the shortcut key of the
user's application software, please make changes according to the shortcut key shown in the list so as to
resolve the conflict problem.
 SCAN DURATION
The function can set the time interval of port switching in SCAN mode. You can use the [↑] [↓] arrow keys
on the keyboard as needed to move the cursor for selection, and then press [Enter] to saveand make it
effective. The initial default setting is 5 seconds.