User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual

Setting Function description

OSD ACTIVATING HOT KEY Theactivating hot key selection of the OSD menu, [CTL] +

[CTL] by default

SWITCH HOT KEY Port switching hot key selection

SCAN DURATION Port scan time interval selection

SET PASSWORD Set user password

SET SUPER PASSWORD Set super password

CLEAR THE NAME LIST Clear port name

RESTORE DEFAULT VALUE Restore factory default settings

LOCK CONSOLE Local password login settings

 OSD ACTIVATING HOTKEY

This function can set and change theactivating shortcut hot key combination of the OSD menu. This device

provides 4 hot key menu combinations: [CTRL] + [CTRL], [SCROLL] + [SCROLL], [ALT] + [ALT],

[SHIFT] + [SHIFT]. You can use the [↑] [↓] arrow keys on the keyboard as needed to move the cursor for

selection, and then press the [Enter] key to save and make it effective. The initial default is to use [CTRL]

[CTRL] as theactivating hotkey for the OSD menu.

Note: The hot key combination you set should not be the same as SWITCH HOT KEY, otherwise it will

affect the relevant operations and function switching. If there is a conflict with the shortcut key of the user's

application software, please make changes according to the shortcut key shown in the list so as to resolve the

conflict problem.