User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual
21
the control of the device, all programs must start from the OSD main screen.
OSD login
The OSD function provides a two-tier (administrator/user) password mechanism. The factory default setting
of the product is that there is no need for login password authentication. Therefore, when you open the OSD
main menu for the first time, you can enter the main menu screen of the OSD to perform corresponding
operations without inputting the login password. If you want to add this function, you can set it in the [F6]
"SET" option after entering the OSD menu. After the login password is set successfully, you will be required
to enter the correct administrator/user password for subsequent loginbefore entering the OSD menu interface
for operation. When you enter the setting option, the editing and modification of some functions may require
the administrator's passwordverification. The factory default administrator password is: admin. You can also
modify and change it as needed.
OSD hot key
By default, you can type the [CTRL] key twice to make the OSD menu appear on the screen of the server
monitor, and you can see the relevant connection information and status information of the server computer
connected to the KVM switch.
Note: You can change the keyboard hot keys of OSD menu startup as needed. This product provides 4 sets
of optional OSD menu hot key combinations, which you can select as needed (please refer to the detailed
description of OSD menu setting functions).
OSD main menu
When you start the OSD, a screen similar to the one below will appear: