User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual

Single device installation

Note: Please confirm that the device is out of power before installation. In order to prevent device damage

during installation, please confirm that all installed devices have good grounding protection.

1. Plug your USB keyboard and mouse into the USB console connection port on the back panel of the

switch.

2. Connect the video signal cable of the HDMI monitor to the HDMI console port and turn on the power.

3. Use a set of KVM connection cables with the model corresponding to this product to plug the HDMI

connector into the HDMI port of any available HDMI connection port area of the switch.

4. Plug the HDMI video connector and USB plug corresponding to the KVM cable into the corresponding

connection port on each computer.

5. Please plug the power adapter included in this package into the AC power supply, and then plug the other