User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual
14
port is not selected, and it is not the computer currently operated.
3 Device reset
button
It is in the small round hole above the text marked [RESET]. In order to reduce
the device restart caused by user's incorrect operation, the product uses the
embedded reset button. The user can insert a needle-shaped object into the round
hole as needed for 1-3 seconds to complete the reset operation of the KVM
device.
Rear view
16-port KVM rear view
2
4 3 1
8-port KVM rear view
4-port KVM rear view
No. Parts Function description
1
KVM connection
port
Please connect one end of the HDMI connector of the corresponding KVM
connection cable to the HDMI interface of the computer and monitor. Connect
the TYPE B of the USB to the corresponding port of the KVM, and TAPE A
interface on the other end to the USB interface of the computer. (Please refer to
the description and introduction in the relevant chapter of "Cable" for the cable
used.)
2
Local HDMI
display port
Please connect the connection cable of the console HDMI monitor to this port.
3
USB keyboard
and mouse port
The interface of keyboard and mouse device connected to the USB port of the
console is USB Type A.
4
Power jack Plug the power adapter'sconnection cable here.