Manualshelf

User's Manual

ManualsBrandsSuzhou Switek Electronics & Technology ManualsElectronicsCAT5 LCD CONTROL PLATFORM
6789101112131415
13
STANDARD RACK INSTALLATION
1. Screw the front flange to the rack first. Slide the bars with the rear flange towards the rack
until the flanges make contact with the rack, then screw the rear flanges to the rack.
2. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely
attach the front of the switch to the front of the rack.
3. Slide the rear attachment sliding brackets along the slide bars until they contact the rear of the
switch.