User's Guide

Buffalo-DS531-C User Guide

www.pairlink.com.cn

- 11 -

The module is limited to OEM installation only.

This product is mounted inside of the end product only by professional installers OEM.

They use this module with changing the power and control signal setting by software of

end product within the scope of this application. End user cannot change this setting.

The OEM integrator has to be aware no to provide information to the end user regarding

how to install or remove this RF module in the user manual of the end product with

integrates this module. The end user manual shall include all required regulatory

information/warning as show in this manual.

RF exposure warning

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment.

This product may not be collocated or operated in conjunction with any other antenna or

transmitter.

This equipment must be installed and operated in accordance with provided instructions

and the antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be collocated or operating in

conjunction with any other antenna or transmitter.

Industry Canada (IC)

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference, and