User's Manual

16
*After the home network connection is successful,
please follow the instructions on the mobile App page
until the Wi-Fi hotspot quickly connects to the network.
• Wi-Fi hotspot network configuration(only 2.4G WIFI is supported)
Robot Operation1 App operation
2
Turn on the power switch of the
robot.
Simultaneously press and hold the "Power
button and recharge button" for about 3-5
seconds, until you hear the prompt tone
"Wifi has been reset", the machine enters
the Wi-Fi hotspot network configuration
mode.
+
3. Network configuration mode
/ 3.1 Hotspot mode
*Tip: If the network configuration fails, please restart
the robot and restart the network configuration.