User's Manual

11
 Do not plug the battery into the charger during the charger upgrade.
 Do not cut off the power and keep your device away from the charger during the upgrade.
 If the upgrade fails,try again.
Storage and Maintenance
1. When the charger is charged finish or not in use, disconnect the battery charging cable from the charger, disconnect
the power cable, and fix the battery charging cable and controller to the fixed position for stability protection.
2. The charger can be handled by the handle alone, and the charging cable should be fixed before handling.
3. Keep the charger away from direct sunlight, rain or humidity for a long time.
4. Store charger away from heat source, high pressure, water, flammable gas, corrosive and other dangerous materials.
5. Please clean the heat dissipation hole of the charger regularly to ensure the charging effect.
Caution
1. AC power input port and generator plug with high voltage ,do not touch.
2.Charger belongs to the product of large leakage current ,before the use of power,must connect the ground wire, to
ensure reliable grounding.
3. When charging indoors, make sure use the 16A air conditioning port socket, and make sure the charging line is larger
than 2.5m
2
national standard line; Do not use a 10A socket to transfer to a 16A socket.
5. Prohibit to use this product in lightning and thunderstorm weather.
4. During the charging process, a human need to guard, To ensure safe of charging ,keep the distance between the
battery and the charger or the battery and the battery greater than 30cm.
5. When using this product ,please keep away from heat,high pressure,water and inflammable, explosive and corrosive
dangerous goods.
6. The product should be placed on a horizontal table ,not titled, and must be left with enough ventilation distance
(recommended to be more than 50cm away from the wall, heat source, windows air inlet) to ensure good ventilation
when the product is working.