User's Manual
Table Of Contents
- 1.Product Overview
- 2.Disclaimer
- 3.UAV Composition
- 4.Technical Parameters
- 5.Check List before Use
- 6.Operating Instructions
- 7.Data Management
- 8.Account Management
- 9.Offline Operation Procedure
- 10.Maintenance Instructions
- 11.Warranty Services
- 12.Nameplate
- EAVision Official Wechat Account
22
Horizontal
Vertical
6.3 Debug during Flight
6.3.1 Magnetic Compass Calibration
After finishing the installation check, the UAV can be tested in the field.
Magnetic compass calibration should be completed before the flight. The
calibrating method is as follows:
Toggle the Channel 5 of the remote control for 8 times consecutively or enter the
"Flight Calibration" page on the APP. Tap "Geomagnetic Calibration" button, the
LED indicator light will turn green, and the UAV will enter horizontal calibration
mode.
Rotate the UAV horizontally to calibrate until the LED indicator light turns blue.
Then the UAV will enter vertical calibration mode.