User's Manual

39
again or tap “Clear Help Point” to clear the help point.
Figure 27 Set Help Point
6.4.2.3 Fly Autonomously
After setting the flight height and uploading the flight route in the “Flight
Monitoring” page, tap “Takeoff” - > “Work”, the UAV will fly to waypoint 1
for operation. Attention should be paid to the followings in the process of
autonomous flight:
➢ Each time after uploading the flight route and tapping “Work”, the UAV will
fly to waypoint 1 first; if the flight route is not uploaded, tap “Work”, the
UAV will fly to the breakpoint of the last route.
➢ The obstacle avoidance function is closed on its way to waypoint 1.
➢ Emergency stop / breakpoint resuming function are available during the flight.
➢ You can select quarter turning or U-bend in the turning mode.
➢ Real-time throttle / heading adjustment and obstacle avoidance through
remote control are available during the flight. See Chapter 3.1.4 for the specific