User's Manual

6.3 Debug during Flight

6.3.1 Magnetic Compass Calibration

After finishing the installation check, the UAV can be tested in the field.

Magnetic compass calibration should be completed before the flight. The

calibrating method is as follows:

➢ Toggle the Channel 5 of the remote control for 8 times consecutively or enter the

“Flight Calibration” page on the APP. Tap “Geomagnetic Calibration” button,

the LED indicator light will turn green, and the UAV will enter horizontal

calibration mode.

➢ Rotate the UAV horizontally to calibrate until the LED indicator light turns blue.

Then the UAV will enter vertical calibration mode.

Horizontal

Vertical