User's Manual

1.Connect the power adaptor with the charging dock.
Note:
• Put the extra cable into the slot on the back of the charging dock
to prevent the cables from being stretched by the robot while
cleaning.
• The charging dock indicator is solid when it has power and is off
when the robot is being charged.
3.To ensure the Robot can clean and recharge, do not put the
charging dock on carpets or move it frequently. If the
charging dock is moved, the Robot may fail to locate itself or
remove the current map. It will create and save a new map
during the next cleaning.
Note:
• The map information (no-go zones, room names, etc.) may loss
afterrebuilding.
4.Put the Robot on the floor and remove both protective strips
behind the bumper.dock is moved.
2.Place the charging dock on the horizontal hard floor and
connect the power supply.
Note:
• Leave 1 meter (3.3 feet) on both sides and 1.5 meters (4.9 feet) in
the front of the charging dock, and make sure there is no objects
or strong light within this area.
• Ensure the charging dock is placed at least 1.5 meters (4.9 feet)
away from stairs, other open areas, and heat sources (such as
heaters).
＞1.5m
＞1m
＞1m
Floor
Wall
Installation Instructions
05 English