360 Robot Vacuum Cleaner User Manual S 10
Safety Information • Before using the product, please read the entire safety instructions and save the manual for future reference. Any operations that do not follow the manual may cause serious injury or damage. 01 English • WARNING • This product can be used and cleaned by children or persons with reduced physical, sensory or mental capabilities only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• RECYCLING AND DISPOSAL • Disconnect the product from the charging dock, turn it off, and remove the battery before recycling or disposal. • Place the battery in a sealed plastic bag and recycle or dispose of it safely according to local environmental regulations. • It is strictly prohibited to burn the product even if the product is severely damaged. Laser safety information • All laser sensors meet the class 1 laser product standard of IEC60825 and does not produce dangerous laser radiation.
Product Overview Robot Robot Charge button • Short press to recharge/pause recharge. • Press and hold to start spot cleaning. 03 CLEAN/power button • Short press to start/pause /resume cleaning. • Press and hold for 3 seconds to turn on/off. • Press and hold for 15 seconds to force shutdown. English Note: After the Robot is turned on, press both buttons and hold for 3 seconds to reset Wi-Fi. Charging dock Dimensions 350 x 350 x 85 mm 13.78 x 13.78 x 3.35 inches Product weight 3.85 kg 8.
Top View TOF laser sensor Laser indicator CLEAN/power button Bumper Charge button Top cover Reset button Wi-Fi indicator Dust bin RESET Cleaning tool 04 Water tank English WiFi Bottom View Main wheels Cliff sensors Carpet detector Floating brush frame Brush roll Charging contacts Front laser sensor Side brush Side laser/wall sensor
Installation Instructions 1.Connect the power adaptor with the charging dock. Note: • Put the extra cable into the slot on the back of the charging dock to prevent the cables from being stretched by the robot while cleaning. • The charging dock indicator is solid when it has power and is off when the robot is being charged. 3.To ensure the Robot can clean and recharge, do not put the charging dock on carpets or move it frequently.
5.Power on and charging. Method 1: Press and hold the button until it lights up and place the Robot within one meter of the charging dock. Press the button, the Robot will automatically search for the charging dock and go to charging. Method 2: Place the Robot on the charging dock and align their charging contacts. The power indicator on the charging dock turns off and the robot will automatically power on and start charging.
After-sales Service Warranty Content Name Warranty Content Main unit Robot (includes build-in battery) 1 year Accessories Chagring dock, wpoer adapter Consumables Brush roll, side brush, brush frame,r ,f iclteleaning tool, dust bin, water ta mnko,p bracket, mop pad Warranty Period 1 year / Exclusions and Limitations 07 English 1.The product is repaired without permission, wrongly used, crashed, neglected, misused, gotten wet, or damaged in an accident, modified, unauthorized accessories are used.
IC warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference and(2) this device must accept any interference, including interference that may cause undesired operation of the device. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
