User manual
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 Activity monitoring
- 3.2 Alti-Baro
- 3.3 Autopause
- 3.4 Backlight
- 3.5 Button lock
- 3.6 Compass
- 3.7 Countdown timer
- 3.8 Displays
- 3.9 FusedAlti
- 3.10 Find back
- 3.11 Icons
- 3.12 Logbook
- 3.13 Memory left indicator
- 3.14 Movescount
- 3.15 Movescount mobile app
- 3.16 Navigating with GPS
- 3.17 Notifications
- 3.18 Recording activities
- 3.19 Points of interest
- 3.20 Routes
- 3.21 Service menu
- 3.22 Software updates
- 3.23 Sport modes
- 3.24 Stopwatch
- 3.25 Suunto Apps
- 3.26 Time
- 3.27 Tones and vibration
- 3.28 Track back
- 3.29 Weather indicators
- 4 CARE AND SUPPORT
- 5 REFERENCE
TIP: When in breadcrumb or compass display, you can quickly
access the navigation menu by pressing [START].
3.18.7 Setting altitude during a recording
You can adjust any of your alti-baro settings, including profile and
reference, during a recording. Keep [NEXT] pressed and adjust
settings as normal (see
3.2 Alti-Baro
).
3.19 Points of interest
Suunto Traverse includes GPS navigation which allows you to
navigate to a pre-defined destination stored as a point of interest
(POI).
NOTE: You can also start navigating to a POI when you are
recording an activity (see 3.18.6 Navigating during a recording).
To navigate to a POI:
1. Press [START] to enter the start menu.
2.
Scroll to
NAVIGATION
with [START] and press [NEXT].
3.
Scroll to
POIs (Points of interest)
using [LIGHT] and press [NEXT].
4. Scroll to the POI you wish to navigate to with [START] or [LIGHT]
and select with [NEXT].
5.
Press [NEXT] again to select
Navigate
.
If you are using the compass for the first time, you need to
calibrate it (see
3.6.1 Calibrating compass
). After activating the
compass, the watch starts searching for a GPS signal.
53