SUUNTO TRAVERSE 1.
1 SAFETY .............................................................................................. 5 2 Getting started ................................................................................. 7 2.1 Using buttons ........................................................................... 7 2.2 Set up ........................................................................................ 8 2.3 Adjusting settings .................................................................. 10 3 Features ..
.13 Memory left indicator .......................................................... 37 3.14 Movescount .......................................................................... 37 3.15 Movescount mobile app ...................................................... 38 3.15.1 Syncing with mobile app ............................................. 40 3.16 Navigating with GPS ............................................................ 41 3.16.1 Getting GPS signal .................................................
3.25 Suunto Apps ......................................................................... 3.26 Time ...................................................................................... 3.26.1 Alarm clock ................................................................... 3.26.2 Time syncing ................................................................. 3.27 Tones and vibration ............................................................. 3.28 Track back ................................................
1 SAFETY Types of safety precautions WARNING: - is used in connection with a procedure or situation that may result in serious injury or death. CAUTION: - is used in connection with a procedure or situation that will result in damage to the product. NOTE: - is used to emphasize important information. TIP: - is used for extra tips on how to utilize the features and functions of the device.
WARNING: ONLY FOR RECREATIONAL USE. WARNING: DO NOT ENTIRELY RELY ON THE GPS OR BATTERY LIFETIME, ALWAYS USE MAPS AND OTHER BACKUP MATERIAL TO ENSURE YOUR SAFETY. CAUTION: DO NOT APPLY SOLVENT OF ANY KIND TO THE PRODUCT, AS IT MAY DAMAGE THE SURFACE. CAUTION: DO NOT APPLY INSECT REPELLENT ON THE PRODUCT, AS IT MAY DAMAGE THE SURFACE. CAUTION: DO NOT THROW THE PRODUCT AWAY, BUT TREAT IT AS ELECTRONIC WASTE TO PRESERVE THE ENVIRONMENT. CAUTION: DO NOT KNOCK OR DROP THE DEVICE, AS IT MAY BE DAMAGED.
2 GETTING STARTED 2.1 Using buttons Suunto Traverse has five buttons which allow you to access all the features. START BACK LAP Tue 4.2.
[BACK LAP]: press to return to the previous menu press to add a lap during a recording keep pressed to lock/unlock buttons [VIEW]: • press to access additional display views • keep pressed to save POI • • • TIP: When changing the values, you can increase the speed by keeping [START] or [LIGHT] pressed until the values start to scroll faster. 2.
Language English 3. Follow the startup wizard to complete initial settings. Set values with [START] or [LIGHT] and press [NEXT] to accept and go to the next step. Unit system Metric After completing the setup wizard, charge the watch with the supplied USB cable until the battery is fully charged. Tue 4.2.
NOTE: If a blinking battery symbol is displayed, Suunto Traverse needs to be charged before starting. 2.3 Adjusting settings You can change the settings of your Suunto Traverse directly in the watch, through Movescount, or on the go with Suunto Movescount App (see 3.15 Movescount mobile app). To change the settings in the watch: 1. Keep [NEXT] pressed to enter the options menu. Enter options ~2 sec 2. Scroll the menu with [START] and [LIGHT]. 3. Press [NEXT] to enter a setting. 4.
NAVIGATION GENERAL ALTI-BARO CONNECTIV... 5. Press [BACK LAP] to return to the previous menu or keep [NEXT] pressed to exit.
3 FEATURES 3.1 Activity monitoring Suunto Traverse measures your daily steps and estimates calories burned during the day based on your personal settings. Your approximate daily step count is available as a default view in the time display. Press [VIEW] to change to the step counter view. The step count is updated every 60 seconds. Tue 4.2. 19:36 1539 steps Daily step count and calories burned are displayed when you enter the logbook (see 3.12 Logbook). The values are reset daily at midnight.
NOTE: Activity monitoring is based on your movement as measured by sensors in the watch. The values provided by activity monitoring are estimations and not intended for medical diagnostics of any kind. 3.2 Alti-Baro Suunto Traverse continuously measures absolute air pressure using the built-in pressure sensor. Based on this measurement and reference values, it calculates altitude or sea level air pressure. Three profiles are available: Automatic, Altimeter and Barometer.
Altitude Altitude 1472 m 26 °C 1472 Altitude m 21:39 1472 m ref 1018hPa Altitude 1472m You can change to different views by pressing [VIEW].
Altitude Altitude 1472 m 26 °C 1472 Altitude m 21:39 1472 m ref 1018hPa Altitude 1472m In barometer profile, you get the corresponding views: • barometric pressure + temperature • barometric pressure + sunrise/sunset • barometric pressure + reference point • 24h barometric pressure graph + barometric pressure Sunrise and sunset time views are available when GPS has been activated. If GPS is not active, sunrise and sunset times are based on the last recorded GPS data.
4. Keep [NEXT] pressed to exit. Repeat the procedure and select ALTI-BARO to show the display again. NOTE: If you are wearing your Suunto Traverse on your wrist, you will need to take it off in order to get an accurate temperature reading because your body temperature will affect the initial reading. 3.2.
CAUTION: Keep the area around the sensor free of dirt and sand. Never insert any objects into the sensor openings. If FusedAlti is activated, the altitude reading is corrected automatically using FusedAlti together with altitude and sea level pressure calibration. For more information, see 3.9 FusedAlti. Changes in local weather conditions affect altitude readings.
Altitude: Set your altitude manually. Sea level pressure: Set the sea level pressure reference value manually. 5. Set the reference value using [START] and [LIGHT]. Accept the setting with [NEXT]. • • TIP: When not recording an activity, press [START] in the altibaro display to get directly to the ALTI-BARO menu. Use example: Setting the altitude reference value You’re on the second day of your two-day hike.
for the activity using the automatic profile, or choose a profile yourself. NOTE: You can also define a specific profile for each of your sport modes under the sport mode advanced settings in Movescount. To set the alti-baro profile: 1. Keep [NEXT] pressed to enter the options menu. 2. Scroll to ALTI-BARO with [LIGHT] and enter with [NEXT]. 3. Scroll to Profile with [START] and enter with [NEXT]. 4. Change the profile with [START] or [LIGHT] and confirm your selection with [NEXT]. 5.
3.2.3 Using altimeter profile The altimeter profile calculates altitude based on reference values. The reference value can either be sea level air pressure or altitude. When the altimeter profile is activated, the altimeter icon is shown at the top of the alti-baro display. Altimeter 1472 m 26 °C 3.2.4 Using barometer profile The barometer profile shows the current sea level air pressure. This is based on the reference values and the constantly measured absolute air pressure.
3.2.5 Using automatic profile The automatic profile switches between the altimeter and barometer profiles according to your movement. It is not possible to measure weather and altitude changes at the same time, as both cause a change in the surrounding air pressure. Suunto Traverse senses vertical movement and switches to measuring altitude, when needed. When altitude is shown, it is updated with a maximum delay of 10 seconds.
3.3 Autopause Autopause pauses the recording of your activity when your speed is less than 2 km/h (1.2 mph). When your speed increases to more than 3 km/h (1.9 mph), the recording continues automatically. You can turn autopause on/off for each sport mode in Movescount under the advanced settings for the sport mode. 3.4 Backlight Pressing [LIGHT] activates the backlight. By default, the backlight turns on for a few seconds and turns off automatically.
You can adjust the backlight brightness (in percent), either in the watch settings under Tones/display » Backlight or in Movescount. TIP: When the [BACK LAP] and [START] buttons are locked, you can still activate the backlight by pressing [LIGHT]. Flashlight In addition to normal backlight modes, Traverse has one additional mode where the backlight is automatically set to maximum brightness and can be used as a flashlight. To activate the flashlight, keep [LIGHT] pressed.
2s 2s Tue Lock 4.2. 19:36 Unlock 21:39 You can change the button lock behavior in the watch settings under GENERAL » Tones/display » Button lock. Your Suunto Traverse has two button lock options: • Actions only: Start and options menus are locked. • All buttons: All buttons are locked. Backlight can be activated in Night mode. TIP: Select the Actions only button lock setting to avoid accidentally starting or stopping your log.
The compass display includes the following information: • middle row: compass heading in degrees • bottom row: compass heading cardinal 273° NW The compass switches to power saving mode after one minute. Reactivate it with [START]. 3.6.1 Calibrating compass If you have not used the compass before, you must first calibrate it. Turn and tilt the watch in multiple directions until the watch beeps, indicating calibration is complete.
If the calibration is successful, the text Calibration successful is displayed. If the calibration does not succeed, the text Calibration failed is displayed. To retry the calibration, press [START]. If you have already calibrated the compass and want to re-calibrate it, you can manually start the calibration process. To manually start compass calibration: 1. Keep [NEXT] pressed to enter the options menu. 2. Scroll to NAVIGATION with [START] and enter with [NEXT]. 3.
need to turn the declination correction off by setting the declination value to 0 degrees. To set the declination value: 1. Keep [NEXT] pressed to enter the options menu. 2. Scroll to NAVIGATION with [START] and enter with [NEXT]. 3. Scroll to Settings with [LIGHT] and select with [NEXT]. 4. Scroll to Compass with [LIGHT] and select with [NEXT]. 5. Scroll to Declination with [LIGHT] and select with [NEXT]. 6. Turn the declination off by selecting --, or select W (west) or E (east).
1. With the compass active, hold the watch in front of you and turn yourself towards your target. 2. Press [BACK LAP] to lock the current degree displayed on the watch as your bearing. 3. An empty triangle indicates the locked bearing in relation to the North indicator (solid triangle). 4. Press [BACK LAP] to clear the bearing lock. 1. 273° NW 2. 3. 273° 273° NW (3.) 4.
3.7 Countdown timer You can set the countdown timer to count down from a preset time to zero. You can show/hide it from the start menu under DISPLAYS » Countdown. When activated, the countdown timer can be accessed by pressing [NEXT] until see the display. Countdown 0:05'00 Adjust The default countdown time is five minutes. You can adjust this time by pressing [VIEW]. TIP: You can pause/continue the countdown by pressing [START].
These are handled as displays that can be viewed by pressing [NEXT]. Some of them are permanent, others you can show or hide as you like. To show/hide displays: 1. Press [START] to enter the start menu. 2. Scroll to DISPLAYS by pressing [LIGHT] and press [NEXT]. 3. In the list of display, toggle any feature on/off by scrolling to it with [START] or [LIGHT] and pressing [NEXT]. Keep [NEXT] pressed to exit the displays menu if needed. Your sport modes (see 3.
To invert the display in the watch settings: 1. Keep [NEXT] pressed to enter the options menu. 2. Press [NEXT] to enter the GENERAL settings. 3. Press [NEXT] to enter Tones/display. 4. Scroll to Invert display with [START] and invert with [NEXT]. 3.9 FusedAlti FusedAltiTM provides an altitude reading that is a combination of GPS and barometric altitude. It minimizes the effect of temporary and offset errors in the final altitude reading.
3.10 Find back Suunto Traverse automatically saves the starting point of your recording if you are using GPS. With Find back, Suunto Traverse can guide you directly back to your starting point (or to the location where the GPS fix was established). To find back: 1. Keep [NEXT] pressed to access the options menu. 2. Press [NEXT] to select NAVIGATION. 3. Scroll to Find back with [START] and select with [NEXT]. The navigation guidance is shown as one of the views in the breadcrumb display. 3.
barometer battery Bluetooth button lock button press indicators current display down/decrease flashlight GPS signal strength heart rate highest point incoming call lowest point message/notification missed call next/confirm pairing 33
settings sport mode storm sunrise sunset up/increase POI icons The following POI icons are available in Suunto Traverse: begin building/home camp/camping car/parking cave crossroad emergency end 34
food/restaurant/cafe forest geocache info lodging/hostel/hotel meadow mountain/hill/valley/cliff road/trail rock sight water/waterfall/river/lake/coast waypoint 3.12 Logbook The logbook stores the logs of your recorded activities. The maximum number of logs and the maximum duration of a single log depends on how much information is recorded in each activity. GPS accuracy (see 3.16.
example, directly impact the number and duration of logs that can be stored. You can view the log summary of your activity right after you have stopped recording or through the LOGBOOK under the start menu. The information shown in the log summary is dynamic: it changes depending on factors such as sport mode and whether or not you used an heart rate belt or GPS.
2. Scroll to Logbook with [LIGHT] and enter with [NEXT]. Your current recovery time is shown. 3. Scroll the logs with [START] or [LIGHT] and select a log with [NEXT]. 4. Browse the summary views of the log with [NEXT]. 3.13 Memory left indicator If more than 50 % of the logbook has not been synchronized with Movescount, Suunto Traverse displays a reminder when you enter the logbook.
TIP: Connect to Movescount to get software updates for your Suunto Traverse. You can transfer data from your watch to Movescount either with the USB cable and computer, or with Bluetooth and the Suunto Movescount App (see 3.15 Movescount mobile app). If you have not done so already, register for a free account in Movescount. To register to Movescount: 1. Go to www.movescount.com. 2. Create your account.
second display, take pictures with data from your move, and create a Suunto Movie. TIP: With any Move that is stored in Movescount, you can add pictures as well as create a Suunto Movie using Suunto Movescount App. To pair with Suunto Movescount App: 1. Download and install the app from iTunes App Store or Google Play. The app description includes the latest compatibility information. 2. Start Suunto Movescount App and turn on Bluetooth if it is not on already. 3.
NOTE: You can change your Suunto Traverse general settings offline. Customizing sport modes and keeping time, date and GPS satellite data up to date require an internet connection over Wi-Fi or mobile network. Carrier data connection fees may apply. 3.15.1 Syncing with mobile app If you have paired your Suunto Traverse with Suunto Movescount App, changes in settings, sport modes, and new logs are automatically synced by default when the Bluetooth connection is active.
4. Press [NEXT] to activate Sync now. If your mobile device has an active data connection and your app is connected to your Movescount account, settings and logs are synced with your account. If there is no data connection, syncing is delayed until a connection is available. Unsynced logs recorded with your Suunto Traverse are listed in the app, but you cannot view the log details until they are synced with your Movescount account. Activities that you record with the app are immediately viewable.
NOTE: When you activate GPS for the first time, or have not used it for a long time, it might take longer than usual to get a GPS fix. Subsequent GPS starts will take less time. TIP: To minimize GPS initiation time, hold the watch steady facing up and make sure you are in an open area with a clear view of the sky. TIP: Regularly synchronize your Suunto Traverse with Movescount to get the latest satellite orbit data. This reduces the time needed to get the GPS fix and improves track accuracy.
• GPS signal does not penetrate any solid constructions or water. Therefore do not try to activate GPS inside buildings, caves or under water. 3.16.2 GPS grids and position formats Grids are lines on a map that define the coordinate system used on the map. Position format is the way the GPS receiver's position is displayed on the watch. All the formats relate to the same location, they only express it in a different way.
• • • • • • • Irish (IG) Swedish (RT90) Swiss (CH1903) UTM NAD27 Alaska UTM NAD27 Conus UTM NAD83 NZTM2000 (New Zealand) NOTE: Some grids cannot be used in the areas north of 84°N and south of 80°S, or outside the countries that they are intended for. 3.16.3 GPS accuracy and power saving When customizing sport modes, you can define the GPS fix interval using the GPS accuracy setting in Movescount. The shorter the interval, the better the accuracy during recording.
Adjust GPS accuracy in the start menu under NAVIGATION » Settings » GPS accuracy. 3.17 Notifications If you have paired your Suunto Traverse with Suunto Movescount App (see 3.15 Movescount mobile app), you can get call, message and push notifications on the watch. +358504418… Incoming call Peter Tomorrow, skiing in Aspen? To get notifications on your watch: 1. Keep [NEXT] pressed to enter the options menu. 2. Press [LIGHT] to scroll to CONNECTIVITY and press [NEXT]. 3.
Up to 10 notifications can be listed. Notifications remain in your watch until you clear them from your mobile device. However, notifications older than one day are hidden from view in the watch. 3.18 Recording activities Use sport modes (see 3.23 Sport modes) to record activities and view various information during your outing. Out of the box, Suunto Traverse has one sport mode, Hiking. Start a recording by pressing [START] and then press [NEXT] to enter RECORD.
calories burned during exercise For the logbook, the heart rate sensor provides: • total calories burned during the activity • average heart rate • peak heart rate If you use the Suunto Smart Sensor, you also have the added advantage of heart rate memory. The memory function buffers data whenever the transmission to your Suunto Traverse is interrupted. This allows you to get accurate intensity information in activities such as swimming where water blocks the transmission.
To pair a heart rate sensor: 1. Activate heart rate sensor. 2. Keep [NEXT] pressed to enter the options menu. 3. Scroll to CONNECTIVITY with [LIGHT] and select with [NEXT]. 4. Press [NEXT] again to enter Pair. 5. Scroll to HR belt with [LIGHT] and press [NEXT]. 6. Hold your Suunto Traverse close to the device you are pairing and wait for Suunto Traverse to notify that pairing was successful. 3.18.2 Starting a recording To start recording: 1. Press [START] to enter the start menu. Tue 4.2.
NAVIGATION RECORD DISPLAYS LOGBOOK 3. If you have more than one sport mode, scroll the list with [START] or [LIGHT] and select a suitable mode with [NEXT]. 4. The watch automatically starts searching for a heart rate signal, if the selected sport mode uses a heart rate sensor. Wait for the watch to notify that the heart rate and/or GPS signal have been found, or press [START] to skip searching and start recording immediately. The watch continues to search the heart rate/GPS signals in the background.
After pausing and stopping the recording, save the log by pressing [START]. If you do not want to save the log, press [LIGHT]. If you do not save the log, you can still view the log summary after pressing [LIGHT], but the log is not stored in the logbook for later viewing. 3.18.3 During a recording As soon as the recording starts, you can access additional displays that show different information related to your activity.
• • • To avoid accidentally stopping your log recording or making unwanted laps, lock the buttons by keeping [BACK LAP] pressed. Press [BACK LAP] to record a lap Keep [START] pressed to end and save the recording. 3.18.4 Recording tracks Depending on the sport mode you have selected, your Suunto Traverse records various information during your activity. If your sport mode has GPS enabled, Suunto Traverse records your track during your activity.
Suunto Traverse shows you the following information: top row: split time (duration from the start of the log) middle row: lap number bottom row: lap time • • • NOTE: The log summary always shows at least one lap, your recording from start to finish. The laps you have made during the recording are shown as additional laps. 3.18.6 Navigating during a recording While you are recording an activity, you can choose to navigate a route or to a POI. To navigate during a recording: 1.
TIP: When in breadcrumb or compass display, you can quickly access the navigation menu by pressing [START]. 3.18.7 Setting altitude during a recording You can adjust any of your alti-baro settings, including profile and reference, during a recording. Keep [NEXT] pressed and adjust settings as normal (see 3.2 Alti-Baro). 3.19 Points of interest Suunto Traverse includes GPS navigation which allows you to navigate to a pre-defined destination stored as a point of interest (POI).
All navigating is recorded. If your watch has more than one sport mode, you are prompted to select one. 6. Start navigating to the POI. The watch displays the breadcrumb display, showing your position and the position of the POI. By pressing [VIEW] you can access additional guidance: • distance and direction to POI in straight line • distance to POI and estimated time en route based on your current speed, • difference between your current altitude and the POI altitude Building 01 dst 3.
3.2 dst km Building 01 3.2 dst km Building 01 3.19.1 Checking your location Suunto Traverse allows you to check the coordinates of your current location using GPS. To check your location: 1. Press [START] to enter the start menu. 2. Scroll to NAVIGATION with [START] and press [NEXT]. 3. Scroll to Location with [LIGHT] and press [NEXT]. 4. Press [NEXT] to select Current. 5. The watch starts searching for a GPS signal and displays GPS found after acquiring the signal.
3.19.2 Adding a POI Suunto Traverse allows you to save your current location or define a location as a POI. You can store up to 250 POIs in the watch. When adding a POI, select a POI type (icon) and POI name from a predefined list, or freely name the POIs in Movescount. To save a POI: 1. Press [START] to enter the start menu. 2. Scroll to NAVIGATION with [START] and press [NEXT]. 3. Scroll to Location with [LIGHT] and press [NEXT]. 4.
3.19.3 Deleting a POI You can delete a POI directly in the watch or through Movescount. However, when you delete a POI in Movescount and synchronize your Suunto Traverse, the POI is deleted from the watch but only disabled in Movescount. To delete a POI: 1. Press [START] to enter the start menu. 2. Scroll to NAVIGATIONwith [START] and press [NEXT]. 3. Scroll to POIs (Points of interest) with [LIGHT] and press [NEXT]. 4. Scroll to the POI you wish to delete with [START] or [LIGHT] and select with [NEXT]. 5.
Routes are also deleted through Movescount. To delete a route: 1. Go to www.movescount.com and log in. 2. Under Plan & Create, browse to Route Planner. 3. Under MY ROUTES, click on the route you want to delete and click DELETE. 4. Sync your Suunto Traverse with Movescount using Suunto Movescount App (see 3.15.1 Syncing with mobile app) or by using Moveslink and the supplied USB cable. 3.20.1 Navigating a route You can navigate a route you have transferred to your Suunto Traverse from Movescount (see 3.
6. Select Forwards or Backwards to chose the direction you want to navigate (from the first waypoint or the last). Forwards Direction Backwards 7. Start navigating. The watch informs you when you are approaching the beginning of the route. Approaching BEGIN 10 km 10 km 8. The watch informs you when you have arrived at your destination. TIP: You can also start navigating while recording an activity (see 3.18.6 Navigating during a recording). 3.20.
• zoomed-in track view of the route: by default, the zoomed-in view is scaled to a 100 m (0.1 mi) scale; the scale is larger if you are far away from the route Track view The full track view shows you the following information: • (1) arrow indicating your location and pointing to the direction of your heading. • (2) the beginning and end of the route • (3) The closest POI is shown as an icon. • (4) scale of the track view (1) (2) (3) 10 km (4) 10 km NOTE: In the full track view the north is always up.
• North up: Displays the zoomed-in map with the north pointing up. 3.21 Service menu To access the service menu, keep [BACK LAP] and [START] pressed simultaneously until the watch enters the service menu. Enter service The service menu includes the following items: • Info: o Air pressure: shows the current absolute air pressure and temperature. o Version: shows the current software and hardware version. o BLE: shows the current Bluetooth Smart version.
NOTE: Power off is a low power state. Follow the normal startup procedure to wake up the device. All settings except time and date are maintained. Just confirm them through the startup wizard. NOTE: The watch switches to power saving mode when it is static for 10 minutes. The watch re-activates when moved. NOTE: Service menu content is subject to change without notice during updates. Resetting GPS In case the GPS unit cannot find a signal, you can reset GPS data in the service menu. To reset GPS: 1.
3.22 Software updates You can update your Suunto Traverse software through Movescount. When you update the software, all logs are automatically moved to Movescount and deleted from the watch. To update your Suunto Traverse software: 1. Install Moveslink if you have not done so already from Movescount. 2. Connect your Suunto Traverse to your computer with the supplied USB cable. 3. If an update is available, your watch is updated automatically. Wait for the update to complete before unplugging the USB cable.
You can transfer up to five sport modes created in Movescount to your Suunto Traverse. 3.24 Stopwatch The stopwatch is a display that can be turned on or off from the start menu. To activate the stopwatch: 1. Press [START] to enter the start menu. 2. Scroll to DISPLAYS with [LIGHT] and press [NEXT]. 3. Scroll to Stopwatch with [LIGHT] and press [NEXT]. When activated, the timer can be accessed by pressing [NEXT] until the timer appears. lap0 00'00.0 00'00.
2. Press [BACK LAP] to make a lap, or press [START] to pause the stopwatch. To view the lap times, press [BACK LAP] when the stopwatch is paused. 3. Press [START] to continue. 4. To reset the time, keep [START] pressed when the stopwatch is paused. While the stopwatch is running, you can: • press [VIEW] to switch between the time and lap time shown on the bottom row of the display. • switch to Time display with [NEXT]. • enter the options menu by keeping [NEXT] pressed.
1. Go to the PLAN & CREATE section in Movescount community and select App Zone to browse existing Suunto Apps. To create your own App, go to the PLAN & CREATE section of your profile and select App Designer. 2. Add Suunto App to a sport mode. Connect your Suunto Traverse to your Movescount account to synchronize Suunto App to the watch. The added Suunto App will show the result of its calculation during your activity. NOTE: You can add up to four Suunto Apps to each sport mode. 3.
3.26.1 Alarm clock You can use your Suunto Traverse as an alarm clock. Turn the alarm on/off and set the alarm time in the options menu under GENERAL » Time/date » Alarm. When the alarm is switched on, the alarm symbol is shown on most of the displays. When the alarm sounds, you can: • Snooze by pressing [LIGHT]. The alarm stops and restarts every five minutes until you stop it. You can snooze up to 12 times for a total of one hour. • Stop by pressing [START].
watch with the Suunto Movescount App, time and time zone are automatically synced with your mobile phone. When you connect your watch to the computer with the USB cable, Moveslink by default updates your watch time and date according to the computer clock. This feature can be turned off in the Moveslink settings. GPS time GPS time corrects the offset between your Suunto Traverse and the GPS time.
• • • Automatic – automatic DST adjustment based on GPS location Winter time – always winter time (no DST) Summer time – always summer time 3.27 Tones and vibration Tones and vibration alerts are used for notifications, alarms and other key events. Both can be adjusted separately in the options menu under GENERAL » Tones/display » Tones or Vibration.
The weather trend indicator is displayed as a view in the time display, providing you a quick way to check weather changes. Tue 4.2. Tue 19:36 21:39 4.2. 19:36 The weather trend indicator is comprised of two lines forming an arrow. Each line represents a 3-hour period. A change in barometric pressure greater than 2 hPa (0.59 inHg) over three hours triggers a change the direction of the arrow.
The storm alarm is off by default. You can turn it on in the options menu under ALTI-BARO » Storm alarm. NOTE: The storm alarm does not work if you have altimeter profile activated. When a storm alarm sounds, pressing any button ends the alarm. If no button is pressed, the alarm repeats once after five minutes. The storm symbol remains on the display until the weather conditions stabilize (pressure drop slows down).
4 CARE AND SUPPORT 4.1 Handling guidelines Handle the unit with care – do not knock or drop it. Under normal circumstances the watch does not require servicing. After use, rinse it with fresh water, mild soap, and carefully clean the housing with a moist soft cloth or chamois. Use only original Suunto accessories - damage caused by nonoriginal accessories is not covered by warranty. TIP: Remember to register your Suunto Traverse at www.suunto.com/support to get personalized support. 4.
To maintain water resistance, it is recommended to: never use the device for other than intended use. contact an authorized Suunto service, distributor or retailer for any repairs. • keep the device clean from dirt and sand. • never attempt to open the case yourself. • avoid subjecting the device to rapid air and water temperature changes. • always clean your device with fresh water if subjected to salt water. • never knock or drop the device. • • 4.
100% 20.9 76-100% 16:30 51-75% Tuesday 26-50% 30sec <10% <2% 0-25% When battery level drops very low during a recording, the watch stops and saves the recording. The watch can still show time, but buttons are deactivated. Charge the battery by attaching it to your computer with the supplied USB cable, or charge with a USB-compatible wall charger. It takes approximately 2-3 hours to fully charge an empty battery. TIP: You can change the GPS fix interval during a recording to save battery life.
We recommend registering your product to get the best personalized support from Suunto. To get support from Suunto: 1. Register at www.suunto.com/support/MySuunto, or if you have already, login and add Suunto Traverse to My Products. 2. Visit Suunto.com (www.suunto.com/support) to see if you question has been asked/answered already. 3. Go to CONTACT SUUNTO to submit a question or call us at any of the listed support numbers. Alternatively, send us an email to support@suunto.com.
5 REFERENCE 5.1 Technical specifications General • • • • • • • • operating temperature: -20° C to +60° C (-5° F to +140° F) battery charging temperature: 0° C to +35° C (+32° F to +95° F) storage temperature: -30° C to +60° C (-22° F to +140° F) weight: ~80g (2.8 oz) water resistance: 100 m (300 ft) glass: mineral crystal power: rechargeable lithium-ion battery Battery life: ~10 - 100 hours depending on selected GPS accuracy; ~14 days with GPS off Memory • Points of Interest (POIs): max.
• resolution: 1 m (3 ft) Thermometer • • display range: -20° C to +60° C (-4° F to +140° F) resolution: 1° Chronograph • resolution: 1 s until 9:59'59, after that 1 min Compass • • resolution: 1 degree (18 mils) accuracy: +/- 5 degrees GPS • • technology: SiRF star V resolution: 1 m (3 ft) 5.2 Compliance 5.2.1 CE Suunto Oy hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 5.2.
been tested to comply with FCC standards and is intended for home or office use. Changes or modifications not expressly approved by Suunto could void your authority to operate this device under FCC regulations. 5.2.3 IC This device complies with Industry Canada licence-exempt RSS standard(s).
13/794,468, US 14/195,670. Additional patent applications have been filed. 5.5 Warranty Suunto warrants that during the Warranty Period Suunto or a Suunto Authorized Service Center (hereinafter Service Center) will, at its sole discretion, remedy defects in materials or workmanship free of charge either by a) repairing, or b) replacing, or c) refunding, subject to the terms and conditions of this Limited Warranty.
2. printed materials and packaging; 3. defects or alleged defects caused by use with any product, accessory, software and/or service not manufactured or supplied by Suunto; 4. non-rechargeable batteries. Suunto does not warrant that the operation of the Product or accessory will be uninterrupted or error free, or that the Product or accessory will work with any hardware or software provided by a third party. This Limited Warranty is not enforceable if the Product or accessory: 1.
be liable for special, incidental, punitive or consequential damages, including but not limited to loss of anticipated benefits, loss of data, loss of use, cost of capital, cost of any substitute equipment or facilities, claims of third parties, damage to property resulting from the purchase or use of the item or arising from breach of the warranty, breach of contract, negligence, strict tort, or any legal or equitable theory, even if Suunto knew of the likelihood of such damages.
INDEX A acivity starting a recording, 48 activities sport modes, 46 activity monitor recovery time, 12 alarm clock, 67 snooze, 67 Alti & Baro Automatic profile, 21 profiles, 18 reference value, 18 Alti-baro, 13 altimeter profile, 20 barometer profile, 20 Alti-Baro correct readings, 16 reference value, 16 altitude during a recording, 53 altitude reference value, 16 autopause, 22 B backlight, 22 brightness, 22 mode, 22 battery charging, 73 bearing bearing lock, 27 button lock, 23 buttons, 7 C calibrating c
displays, 29 show/hide displays, 29 during a recording, 50 navigating, 52 F find back, 32 flashlight, 22 FusedAlti, 16, 31 G GPS, 41 GPS signal, 41 GPS accuracy, 44 grids, 43 H handling, 72 heart rate belt, 46 heart rate memory, 46 heart rate sensor, 46 pairing, 47 I icons, 32 L laps, 51 logbook, 35 M 84 memory left indicator, 37 Movescount, 37, 38 Suunto App, 65 Suunto App Designer, 65 Suunto App Zone, 65 Moveslink, 37 N navigating find back, 32 point of interest (POI), 53 route, 58 P pairing hear
S V sea level pressure value, 16 service menu, 61 settings, 10 adjust settings, 10 software, 63 sport mode, 48 during a recording, 50 sport modes, 63 startup wizard, 8 stopwatch, 64 support, 74 Suunto App, 65 Suunto App Designer, 65 Suunto App Zone, 65 Suunto Movescount App, 38 syncing, 40 Suunto Smart Sensor, 46 vibration, 69 W waypoints, 58 weather storm alarm, 69 weather trend, 69 T time, 66 alarm clock, 67 Daylight Saving Time, 67 GPS time, 67 timers countdown timer, 29 tones, 69 Track back, 69 85
SUUNTO CUSTOMER SUPPORT 1. www.suunto.com/support www.suunto.com/mysuunto 2.
