User manual

5.
The watch starts searching for a GPS signal and displays GPS
found after acquiring the signal. After that your current
coordinates are shown on the display.
TIP: You can also check your location while you are recording an
activity by keeping [NEXT] pressed to access NAVIGATION in the
options menu or by pressing [START] while in the breadcrumb
display.
3.21.2 Adding a POI
Suunto Traverse Alpha allows you to save your current location or
define a location as a POI.
You can store up to 250 POIs in the watch.
When adding a POI, select a POI type (icon) and POI name from a
predefined list, or freely name the POIs in Movescount.
To save a POI:
1. Press [START] to enter the start menu.
2.
Scroll to
NAVIGATION
with [START] and press [NEXT].
3.
Scroll to
Location
with [LIGHT] and press [NEXT].
4.
Select
Current
or select
Define
to manually change longitude
and latitude values.
5. Press [START] to save the location.
6. Select a suitable name for the location. Scroll through the name
options with [START] or [LIGHT]. Select a name with [NEXT].
7. Press [START] to save the POI.
55