User Manual

3.22.1 Navigating a route
You can navigate a route you have transferred to your Suunto
Traverse Alpha from Movescount (see 3.20 Routes) or from a log in
your logbook with GPS data. You get a preview of the route based
on the route list or logbook selection.
If you are using the compass for the first time, you need to calibrate
it (see
3.6.1 Calibrating compass
). After activating the compass, the
watch will begin searching for a GPS signal. After the watch
acquires a GPS signal, you can begin to navigate a route.
To navigate a route:
1. Press [START] to enter the start menu.
2.
Scroll to NAVIGATION with [START] and press [NEXT].
3.
Scroll to Routes or NAVIGATION and press [NEXT] to enter .
4. Scroll to the route you want to navigate with [START] or [LIGHT]
and press [NEXT].
5.
Press [NEXT] to select Navigate.
All navigating is recorded. If you watch has more than one sport
mode, you are prompted to select one.
6.
Select Forwards or Backwards to chose the direction you want to
navigate (from the first waypoint or the last).
59