User Manual

You can adjust the predefined GPS accuracy of the sport mode if
needed only during a recording and while navigating. For instance,
if you notice you are low on battery, you could adjust the setting to
extend battery life.
Adjust GPS accuracy in the start menu under NAVIGATION »
Settings » GPS accuracy.
3.18.4 GPS and GLONASS
Suunto Traverse Alpha uses a Global Navigation Satellite System
(GNSS) to determine your location. The GNSS can use signals from
both GPS and GLONASS satellites.
By default your watch searches for GPS signals only. In some
situations and locations already the world, using GLONASS signals
can improve location accuracy. However, keep in mind that using
GLONASS consumes more battery than using GPS only.
You can activate or deactivate GLONASS at any time, even while
recording an activity.
The activate or deactivate GLONASS:
1. Keep [NEXT] pressed to enter the options menu.
2.
Scroll to NAVIGATION with [START] and enter with [NEXT].
3.
Scroll to SETTINGS with [LIGHT] and select with [NEXT].
4.
Scroll to GNSS with [START] and select with [NEXT].
5.
Choose GPS & GLONASS to activate GLONASS. If already active,
choose GPS to deactivate GLONASS.
6. Keep [NEXT] pressed to exit.
51