User Manual

You can change backlight color, when using red backlight, setting

the brightness to 10% makes it possible to view the backlight

through night vision goggles.

You can adjust the backlight brightness (in percent), either in the

watch settings under Tones/display » Backlight or in Movescount.

TIP: When the [BACK LAP] and [START] buttons are locked, you

can still activate the backlight by pressing [LIGHT].

NOTE: Setting the backlight color to red will not affect the

color of flashlight

Flashlight

In addition to normal backlight modes, Suunto Traverse Alpha has

one additional mode where the backlight is automatically set to

maximum brightness and can be used as a flashlight. To activate the

flashlight, keep [LIGHT] pressed.

The flashlight stays on for about four minutes. You can turn it off at

any time by pressing [LIGHT] or [BACK LAP].