Manual

To put the device into sleep mode:

1. After the last step of general settings, when the device asks you to confirm

that the setting changes are done, keep NEXT pressed until the device goes

into sleep mode.

2. Press any button to activate the device again.

3. Set the initial settings, see Chapter 5 Getting started on page 12.

NOTE: When replacing the battery, only the time and date change. The device

remembers your previous initial settings and recorded exercises.

Example: adjusting alarm settings

When the alarm is on, is shown on the display.

To set the alarm on/off:

1. In the time view, keep NEXT pressed to enter the settings.

2. Browse to alarm with START STOP and confirm with NEXT.

3. Set the alarm on or off with START STOP and LIGHT LOCK. Confirm with NEXT.

4. Set the alarm time with START STOP and LIGHT LOCK. Confirm with NEXT.

When the alarm sounds, press stop (LIGHT LOCK) to turn it off.

After you have stopped the alarm, it sounds the same time the following day.