Manual
Table Of Contents
- 1. Introduction to Suunto Memory Belt
- 2. Getting started with suunto Memory Belt
- 3. Downloading and analyzing data recorded with Suunto Memory Belt
- 4. Errors and warnings
- 5. Installing Suunto software
- 6. Using Suunto Memory Belt with other Suunto devices
- 7. Technical specifications
- 8. Intellectual property
- 9. Disclaimers
- 10. Disposal of the device
7
After training, when you take off the Suunto Memory Belt, 2 long beeps and 2 long green
flashes will indicate that the device hasn’t received data for 30 seconds. After 60 seconds,
the device will stop recording and transmitting, then go into sleep mode, which is indicated by
3 short beeps and 3 short green flashes.
3. DOWNLOADING AND ANALYZING DATA RECORDED WITH SUUNTO
MEMORY BELT
Suunto Memory Belt records your heart rate interval data for further analysis. To transfer the
data to your PC, you need the Suunto Memory Belt docking station and appropriate PC soft-
ware. With the software you can analyze the recorded data and customize the belt settings.
3 short, green
3 short
stops recording. After 60
seconds, enters sleep mode
Stores athlete profiles and analyses logs
recorded by Suunto Memory Belt.
Suunto Memory Belt and docking station
Suunto Memory Belt records heart rate interval data. The data is transferred to your
PC with the docking station.