Manual
Table Of Contents
- 1. Introduction to Suunto Memory Belt
- 2. Getting started with suunto Memory Belt
- 3. Downloading and analyzing data recorded with Suunto Memory Belt
- 4. Errors and warnings
- 5. Installing Suunto software
- 6. Using Suunto Memory Belt with other Suunto devices
- 7. Technical specifications
- 8. Intellectual property
- 9. Disclaimers
- 10. Disposal of the device
15
5. INSTALLING SUUNTO SOFTWARE
INSTALLING THE SOFTWARE
NOTE: Do not plug the Memory Belt docking station into the PC before the installation has
been completed.
1. Insert the Suunto software CD-ROM into the drive.
2. Wait for the installation to begin and follow the installation instructions.
NOTE: If the installation does not start automatically, click Start --> Run, and type
D:\suunto.exe.
6. USING SUUNTO MEMORY BELT WITH OTHER SUUNTO DEVICES
Suunto Memory Belt dual functionality of recording and transmitting is maximized when it is
used in conjunction with Suunto PC software and other Suunto devices. The optional soft-
ware and devices enable both real-time analysis, through viewing the data as it is being
transmitted, and deeper analysis after the training has finished.
To use Suunto Memory Belt with other Suunto devices, pair the Suunto Memory Belt with the
device with which you want to monitor your heart rate. You will find the pairing instructions in
the user’s guide of each device.