User manual
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 Activation and pre-checks
- 3.2 Alarms, warnings and notifications
- 3.3 Apnea timer
- 3.4 Backlight
- 3.5 Battery indicators
- 3.6 Calendar clock
- 3.7 Display contrast
- 3.8 Depth alarm
- 3.9 Dive history
- 3.10 Dive modes
- 3.11 Dive time alarm
- 3.12 Sample rate
- 3.13 Stopwatch
- 3.14 Surface and no-fly time
- 3.15 Tones
- 3.16 Water contact
- 4 CARE AND SUPPORT
- 5 REFERENCE
2 GETTING STARTED
2.1 Display states and views
Suunto D4f has three main modes: TIME, DIVE and MEMORY.
Change modes by pressing [MODE].
Unless DIVE mode is turned off, Suunto D4f automatically switches
to DIVE mode if you are more than 1.2 m (4 ft) under water.
DIVE MEM
12:00
1.12
TH
12:00
1.12
TH
Time and dive modes have different views in the bottom row which
you can scroll through with [DOWN] and [UP].
2.2 Set up
To get the most out of your Suunto D4f, take some time to read this
manual and familiarize yourself with the modes and settings. Make
absolutely sure you have it set up as you want before getting into
the water.
To get started:
1. Wake up the device by keeping any button pressed until the
display turns on.
2.
Keep [DOWN] pressed to enter General Settings.
8